No products
Catalog
Vaporizer accessories There are 1111 products.
- 12,72 € 15,90 € -20% Immediate shipment
Aérotube long pour Solo / Air à billes et...
The aerotube for vaporizer Arizer Solo 1 & 2 and Air 1, 2 & MAX is a glass tube that creates a very long vapor path, further lengthened by the presence of nine balls and twelve pins along the mouthpiece. Thus the steam is effectively refreshed, and the flavors as pure as with the original aroma tube.
12,72 € 15,90 € -20%Reduced price! - 1,60 € 2,00 € -20% Immediate dispatch
Pack of stainless steel grids Katalyzer...
Contains three stainless steel grids designed by Katalyzer for your VapCap The M and other Dynavap vaporizers.
1,60 € 2,00 € -20%Reduced price! - 13,52 € 16,90 € -20% Immediate shipment
Aérotube pour Fenix Mini long à embouchure...
Long aerotube designed by Katalyzer for your Fenix Mini Dee Pro portable vaporizer. This mouthpiece has pimples along the vapor path. The turbulence that is created allows for a fresher vapor experience. The 120° curved straw-like mouthpiece provides a better comfort of use thanks to a better visibility of the screen.
13,52 € 16,90 € -20%Reduced price! - 6,56 € 8,20 € -20% Immediate shipment
Solo & Air Stem with 7 cm mouthpiece...
Small glass mouthpiece Katalyzer with silicone tip for portable vaporizers Arizer. Length*: 70 mm. The necessary accessory to use your Arizer Air or Solo. The silicon tip allows a good cooling of the vapor and thus to bring out the flavors better. This is not an official accessory Arizer.
6,56 € 8,20 € -20%Reduced price! - 50,00 € Immediate shipment
Stem DreamWood grenadille DynaVap VapCap
Red heart wood body (Chakte-kok) for VapCap DynaVap handmade by DreamWood (Germany). Tip and cap DynaVap not included.
50,00 € - 59,00 € Immediate shipment
Stem DreamWood grenadilla DynaVap VapCap
Pomegranate wood body for VapCap DynaVap, handcrafted by DreamWood (Germany). Tip and DynaVap cap not included.
59,00 € - 25,52 € 31,90 € -20% Immediate shipment
Dyna Station Katalyzer stand for Dynavap
This accessory designed by Katalyzer allows you to gather everything you need so that you have everything at hand during your vaping sessions with Dynavap. Whether it's to store your pipe cleaners, your Wand Ispire induction heater or your isopropyl alcohol, with its three compartments and its magnetic support it will quickly become an essential ally.
25,52 € 31,90 € -20%Reduced price! - 12,90 € Immediate shipment
Tinymight Beeswax jar
Official Beeswax jar for the wood of your Tinymight vaporizer, mixed with kerosene oil to nourish and protect the wood of the Tinymight vaporizer body. Local beeswax from Finnish production.
12,90 € - 1,90 € In Stock
Cooling unit grille Tinymight
Contains an official replacement grille for your vaporizer's cooling unit Tinymight and Tinymight 2.
1,90 € - 1,90 € Immediate dispatch
Rimmed Basket screen Tinymight
Includes an official concave basket screen for Tinymight & Tinymight 2 vaporizers, a new version with reinforced rim for use with theextra-long aerotube, to block plants at the bottom.
1,90 € - 16,72 € 20,90 € -20% Immediate shipment
Hydratube 14 mm femelle à 14 mm mâle...
This hydratube / bubbler Katalyzer is a perfect water filter for your portable or living room vaporizers with a 14mm male joint. Perfect for filtering plant particles, refreshing and humidifying vapor.Has a male ♂ Ø 14 mm joint to connect your mouthpiece/hose (optional) and a female ♀ Ø 14 mm joint to connect your vaporizer.
16,72 € 20,90 € -20%Reduced price! - 11,90 €
Flame intake courbé long (90 mm?) pour Tetra
A spare part for your DynaBox Tetra vaporizer, this curved and long (7 cm) flame intake is the glass piece that allows the flame to spread its heat. The thickness of the glass gives it a certain solidity Sold by unit.
11,90 € - 11,90 €
Flame intake droit long (90 mm?) pour Tetra
A spare part for your DynaBox Tetra vaporizer, this straight and long (7 cm) flame intake is the glass piece that allows the flame to spread its heat. The thickness of the glass gives it a certain solidity and the small indentation in the tube allows to restrict the amount of incoming heat to avoid combustion. Sold by unit.
11,90 € - 11,90 € Immediate shipment
Flame intake courbé court (50 mm) pour Tetra
A spare part for your DynaBox Tetra vaporizer, this short (5 cm) curved flame intake is the glass piece that allows the flame to spread its heat. The thickness of the glass gives it a certain solidity and the small indentation in the tube allows to restrict the amount of incoming heat to avoid combustion. Sold by unit.
11,90 € - 11,90 € Immediate shipment
Embout de chauffe droit court pour Tetra
A spare part for your DynaBox Tetra vaporizer, this short (5 cm) straight flame intake is the glass piece that allows the flame to spread its heat. The thickness of the glass gives it a certain solidity and the small indentation in the tube allows to restrict the amount of incoming heat to avoid combustion. Sold by unit.
11,90 € - 9,52 € 11,90 € -20%
Cup DynaVap pour Wand Ispire
Heating a Dynavap with a Wand is not very complex, but you have to be careful to position your cap correctly for an even, regular and efficient heating. This glass bowl Katalyzer makes the task much easier, as well as allowing you to leave your Dynavap vaporizer a few seconds longer after the click to obtain a greater density of vapor.
9,52 € 11,90 € -20%Reduced price! - 4,90 € Immediate shipment
Glass aroma dish Arizer Solo & Air
Official aromatherapy bowl for Arizer Solo 1 & 2 and Air 1, 2 and MAX. Will replace the original one in case of loss or breakage, or to vary the essences to be diffused without risk of mixing them.
4,90 € - 3,50 € Immediate shipment
Glass whip mouthpiece Arizer
Replacement part for the mouthpiece of your Arizer V-Tower, Extreme Q or XQ2 whip.
3,50 € - 9,90 € Immediate shipment
10 cm glass mouthpiece for Tetra
Official glass mouthpiece for Tetra vaporizers from DynaBox, with efficient cooling of the vapor thanks to its spiked path.
9,90 € - 24,90 € Immediate shipment
Titanium Heating Component for Tetra
Alternative titanium heating element for Tetra vaporizers from DynaBox. This official product replaces the original glass air inlet tube and gives your brick - besides a more compact size -a different type of heating.
24,90 € - 17,85 € 21,00 € -15% Immediate shipment
PAX 3 & 2 non-vented oven lid (without holes)
Replacement accessory for PAX 3 or 2 designed by Cannabis Hardware (formerly New Vape) made of PEEK™, a medical grade heat resistant material. Allows for more optimal vaping. Especially suitable for use with water filters.
17,85 € 21,00 € -15%Reduced price! - 17,85 € 21,00 € -15%
PAX 3 & 2 vented oven lid (sans pusher)
There's nothing like this accessory designed by Cannabis Hardware (formerly New Vape) made of PEEK™, a medical grade heat resistant material, to greatly improve the airflow of your PAX 3 or 2 vaporizer. Especially suitable for use with water filters.
17,85 € 21,00 € -15%Reduced price! - 2,95 € Immediate shipment
Chamber Lock Ring for Fenix 2.0
Official replacement ring to lock the chamber of your Fenix 2.0.
2,95 € - 4,60 € 5,11 € -10% Immediate dispatch
Filling pads for dosing capsules Storz &...
Contains 4 capsule filling pads Storz & Bickel.
4,60 € 5,11 € -10%Reduced price! - 11,61 € 12,90 € -10% Immediate shipment
Cordon d'alimentation Volcano Hybrid
Official power cord for Volcano Hybrid, with European plug
11,61 € 12,90 € -10%Reduced price! - 53,10 € 59,00 € -10% Immediate shipment
Chambre de remplissage pour Volcano Hybrid
New filling chamber (February 2022) with ceramic lining for Volcano Hybrid.
53,10 € 59,00 € -10%Reduced price! - 2,99 €
- 9,50 € Immediate shipment
Keychain for Reload (MAD Heaters)
This simple little accessory enhances the Reload from MAD Heaters with a small but highly appreciated function for mobile vaporists: it takes advantage of the powerful magnet in the Reload's lid to attach itself to the Reload, enabling it to be hung on a key-ring, on your trouser loop, or in a whole host of other ways.
9,50 € - 46,50 €
Reload - boîte multifonction pour Revolve...
MAD Heaters has designed this multifunctional box to make life easier for Dynavap and Revolve aficionados. Thus, you will have, in addition to a storage for your plants, a powerful magnet to cool and remove the cap of your Dynavap, but also an integrated and detachable debowler, a tool to easily mount your CCD grids on your VapCap and a tool to tamp your...
46,50 € - 19,90 € Immediate shipment
Connoisseur Bowl for Arizer XQ2 / Extreme...
Filling chamber specially designed by Arizer for XQ2, it will also give a fresh touch to your Extreme Q and V-Tower. Completely made of glass, with two chamber sizes to choose from and plants more or less close to the heater (more details in description).
19,90 € - 84,92 € 99,90 € -15%
FlowerPot Heat Shield
Designed to accommodate your FlowerPot head (Vrod, WeedEater or B2) in a safe way, so you don't risk burning your stuff or your fingers, this FlowerPot Heat Shield (3379) is an official accessory compatible with all stands of the Cannabis Hardware brand (ex NewVape).
84,92 € 99,90 € -15%Reduced price! - 17,52 € 21,90 € -20% Immediate shipment
VapoClic pour Dynavap Katalyzer
An aerotube Katalyzer well thought out, equipped with an intercooler studded with spikes to effectively refresh the vapor of your Dynavap tip, without humidifying it. The mouthpiece is specially designed to fit the shape of your lips and improve the comfort of use.
17,52 € 21,90 € -20%Reduced price!
