Reload - boîte multifonction pour Revolve (MAD Heaters)

MAD Heaters has designed this multifunctional box to make life easier for Dynavap aficionados. Thus, you will have, in addition to a storage for your plants, a powerful magnet to cool and remove the cap of your Dynavap, but also an integrated and detachable debowler, a tool to easily mount your CCD grids on your VapCap and a tool to tamp your bowl

Features :

• Manufacturer: MAD Heaters (UK);
• Materials: aluminum, silicone seals and stainless steel key ring;
• Dimensions: 7.3 x 3.3 cm ;
• Weight: 57 g.

When you buy a Reload, you get :

• 1 x Reload box ;
• 1 x mini pot ;
• 5 x O-rings :
  • 2 x black seals ;
  • 2 x green seals ;
  • 1 x brown seal.

⚠️ M agnetic key ring is available optional.

Use :

1. Unbowler

Unscrew the top compartment of the Reload ;

You should see a small spike sticking out slightly, this is where you can easily empty your Dynavap tip. The AVB can of course be stored in the compartments of the Reload for later use.

2. Uncapping:

This time, it is the Reload's lid that will interest us. It has a strong magnet in the center to cool your Dynavap faster and keep it upright.

If you look closely at the sides of this magnet, you will notice two notches. They fit perfectly into the groove of the Dynavap caps, which allows you to hold them and remove them (without risk of burning) by pulling your vaporizer up.

3. Flapper:

Your Dynavap CCD grid or the reclaim catcher of your Reload is deformed? Don't panic, simply place them on a flat, hard surface and use the Reload as a rolling pin to reshape them.

You can also use the CCD grid tool (see part 5) by placing one of the grids in the center of the grid holder, then pressing in the center to make it concave, turn the grid over and repeat the operation to flatten it.

4. Tip Tapper:

To get a denser vapor during your sessions, you can gently tamp with the built-in tool on the other side of the debowler.

It is quite possible to unscrew the latter to facilitate the handling (see part 1).

5. Preparation and mounting/adjustment of CCD grids :

Works only with"Adjust-a-bowl" tips. You can prepare your CCD grids and mount them in your tip with this handy tool. By screwing the center part more or less, you will be able to precisely adjust the height of the CCD grid in your Dynavap tip, and thus the desired size of the filling chamber. Perfect for micro-dosing sessions.

A small white circle serves as a marker to help you count the number of screw turns, so that you can adjust your tip to the same height later.

6. Plant Box / AVB:

You can leave your AVB in the debowler compartment, and use the bottom tier of the Reload to store your plants before vaping.

Back to video:

☎️ F or any questions before or after purchasing a MAD Heaters Reload our team of enthusiasts is available on our steam hotline at 01 83 64 69 26 from 11 h to 19 h Monday through Friday, and from 12 h to 19 h on Saturday . You can also order directly over the phone if you wish.

If you want to buy a vaporizer in Paris, our vaporizer store is now 200 meters from the Voltaire metro on line 9, at 6 boulevard Magenta 75010 Paris.

☎️ For any questions before or after purchase, our team of enthusiasts is at your disposal on our vape hotline at +33 1 83 64 69 26 from 11 am to 7:30 pm from Monday to Friday, and from 12:30 pm to 7:30 pm on Saturday. You can also place an order directly over the phone if you wish.

If you want to buy a vaporizer in Paris, our vaporizer shop is 500 meters from the République metro station, at 16 boulevard de Magenta, 75010 Paris.