Reload - Multifunction Case for Dynavap/Revolve (MAD Heaters)

MAD Heaters designed this multifunctional case to make life easier for Dynavap enthusiasts. In addition to a compartment for storing your herbs, it features a powerful magnet to cool and remove the cap from your Dynavap, as well as a built-in, detachable debowler, a tool for easily attaching your CCD screens to your VapCap, and a tool for packing your bowl.

Features:

• Manufacturer: MAD Heaters (United Kingdom);
• Materials: aluminum, silicone gaskets, and stainless steel keyring;
• Dimensions: 7.3 x 3.3 cm;
• Weight: 57 g.

When you buy a Reload, you’ll receive:

• 1 x Reload box;
• 1 x mini jar;
• 5 x O-rings:
  • 2 x black O-rings;
  • 2 x green O-rings;
  • 1 x brown O-ring.

⚠️ The magnetic keyring is available as an optional accessory.

Usage:

1. To remove the bowl: 

Unscrew the top compartment of the Reload;

You should see a small pin protruding slightly; this allows you to easily empty your Dynavap tip. The AVB can, of course, be stored in the Reload’s compartments for later use.

2. Cleaning:

This time, we’ll focus on the Reload’s lid. It features a powerful magnet in the center to cool your Dynavap more quickly and keep it upright.

If you look closely at the sides of this magnet, you’ll notice two notches. These fit perfectly into the groove on the Dynavap caps, allowing you to hold them in place and remove them (without risk of burns) by pulling your vaporizer upward.

3. Flattener:

Is your Dynavap CCD screen or your Reload’s reclaim catcher warped? Don’t panic—simply place them on a flat, hard surface and use the Reload like a rolling pin to reshape them.

You can also use the CCD screen tool (see section 5) by placing one of the screens in the center of the screen holder, then pressing down in the center to make it concave; flip the screen over and repeat the process to flatten it.

4. Tip Tester:

To achieve denser vapor during your sessions, you can gently pack the tobacco using the built-in tool on the other side of the debowler.

You can unscrew this tool to make it easier to handle (see Part 1).

5. Preparing, Assembling, and Adjusting CCD Screens:

Works only with “Adjust-a-bowl” tips. You can prepare your CCD screens and install them in your tip using this handy tool. By tightening or loosening the central part, you’ll be able to precisely adjust the height of the CCD screen in your Dynavap tip—and thus set the desired size for the filling chamber. Perfect for spot-on microdosing sessions.

A small white circle serves as a marker to help you count the number of screw turns, so you can readjust your tip to the same height later on.

6. Herb Box / AVB:

You can leave your AVB in the debowler compartment and use the lower section of the Reload to store your herbs before vaporizing.

☎️ For any questions before or after purchase, our team of enthusiasts is at your disposal on our vape hotline at +33 1 83 64 69 26 from 11 am to 7:30 pm from Monday to Friday, and from 12:30 pm to 7:30 pm on Saturday. You can also place an order directly over the phone if you wish.

If you want to buy a vaporizer in Paris, our vaporizer shop is 500 meters from the République metro station, at 16 boulevard de Magenta, 75010 Paris.