No products
Catalog
Vaporizer accessories There are 1200 products.
- 71,00 € In Stock
Clampy DIY Coil Post
Made from high-quality 6061 aluminum by Cannabis Hardware, Clampy is designed to convert your coils into a wireless injector or diffuser heater.
71,00 € - 133,00 € Immediate dispatch
Flowerpot Tomcat Head Assembly 3mm Ruby
Also known as Flowerpot F16, the Tomcat Head Assembly allows you to create a heating element compatible with the two supports offered by Cannabis Hardware: injector and diffuser! The assembly is to be installed on a 20 mm coil.
133,00 € - 8,40 € In Stock
Airstream glass tube
Enhance your experience with this official glass mouthpiece for the Airstream vaping station pipe from Cannabis Hardware. Made from borosilicate glass, it ensures smoother vapor and more pleasant ergonomics.
8,40 € - 8,70 € In Stock
Stem for Matrix Bowl
The glass stem for Matrix Bowl Cannabis Hardware allows it to be fitted to a joint of the corresponding diameter, either 14 mm or 18 mm
8,70 € - 55,00 € In Stock
Titanium insert for Matrix Bowl and Pipe...
Transform your vape sessions with our titanium insert, perfectly designed for the Matrix Bowl and Haze pipe or Blazenot compatible with injectors. Made from grade 2 titanium, this insert ensures excellent heat retention and even distribution, allowing you to savor the full range of flavors.
55,00 € - 26,50 € In Stock
VapCap Tip for bowl Haze or Blaze
Convert your Pipe Blaze or Haze from Cannabis Hardware into a Dynavap tip platform.
26,50 € - 31,90 € In Stock
Titanium injector insert for Matrix Bowl...
Make the Matrix Bowl, Haze Pipe or Blaze Pipe compatible with injectors with this Cannabis Hardware titanium insert. Made from Grade 2 titanium, this insert ensures excellent heat retention and even distribution, allowing you to fully enjoy the flavours of your favourite strains.
31,90 € - 7,10 € In Stock
Replacement tube for Haze Pipe
Ideal for replacing a tube of Haze Pipe Cannabis Hardware. Or, to customize your own Haze Pipe.
7,10 € - 36,90 € Immediate dispatch
200 Ruby Balls FlowerPot Ø 3 mm
Bag of approx. 200 official Ruby balls for Heads (or heating elements) from Cannabis Hardware. These ruby balls (terp pearls) improve heat retention, create more air passage and therefore enable better heat transfer.
36,90 € - 89,00 € Immediate dispatch
Thermal Hyper Cap
The Thermal Hyper Cap (THC) heralds the age of ball vapes at Dynavap: transform your HyperDyn by adding sapphire balls and turn it into a true mechanical convection vaporizer! Release imminent, check back soon for more information!Pre-order purchases only, shipping from March 13, 2025.
89,00 € - 49,00 € Immediate dispatch
The BallR Cap
The BallR is the first cap to transform your Dynavap into a ball vape, reducing conduction heating and promoting convection. By inhaling gently and evenly, you'll get clouds that taste better than ever! This cap is filled with stainless steel balls, making it compatible with induction heaters (the manufacturer particularly recommends The Wand). Release...
49,00 € - 48,00 € Immediate dispatch
Aeris Wireless Charging Dock Focus V
Official Wireless Charging Base for Aeris concentrate vaporizers from Focus V.
48,00 € - 8,90 € Immediate dispatch
Nozzle for water filter adapter V.A.P
Official 14 mm replacement glass gasket for the water filter adapter (WPA) for V.A.P. (Vaporisateur pour Amateur de Plantes) (French version of the XMax V3 Pro offered by the brand Katalyzer). Ideal if you've lost or damaged the original WPA mouthpiece, or if you already own theglass mouthpiece or hydratube for V.A.P (list not exhaustive), as you can...
8,90 € - 153,90 € Immediate dispatch
Auber Enail Controller
The Auber controller, with its XLR connection to the enail, ensures consistent, reliable performance.
153,90 € - 34,90 € Immediate dispatch
Pivot Hashba Glass mouthpiece
Mouthpiece for Puffco Pivot, to be used with/without the rubber seal. Airflow remains the same as with the silicone cap. Carefully remove the mouthpiece when using with beads.
34,90 € - 4,90 €
Aroma filling and packing tool
A dosing spoon for easy filling of your vaporizer chamber. The other end is flattened, for quick packing of the bowl. This is a 3D-printed accessory by Old Mate Designs, optimized for use with the Aroma-3 grinder. Of course, you can also use it with the vaporizer or grinder of your choice.
4,90 € - 1,90 € Immediate dispatch
Coaster QaromaShop
Small round mat from QaromaShop to place under your Qaromashop porcelain stand (or other glassware) to avoid bumps against a hard surface. Simple and effective!
1,90 € - 28,90 € Immediate dispatch
Tempest adapter pack for Wand
Official set MAD Heaters including a Tempest quartz adapter bowl and a mini-stand for the Wand Ispire as well as a set of Ø 2.5 mm borosilicate glass beads for the Tempest heating head. The stand prevents contact between the hot quartz bowl and the surface below, and allows the Wand to be used on edge.
28,90 € - 28,80 € Immediate dispatch
Dimpled Adapter Short Glass Bowl 18mm
Official adapter bowl QaromaShop with male seal ♂ Ø 18 mm, glass grid and side handle. Also available with Ø 14 mm joint.
28,80 € - 17,01 € 18,90 € -10% Immediate dispatch
10 ruby pearls 3 mm
Pack of 10 Ø 3 mm ruby pearls from JCVAP, to be used in your dab configurations for better distribution and evaporation of your concentrates. You can also place them in your injectors or other heating heads to benefit from their excellent thermal retention. They can also be used to improve cooling when placed in the steam passage of your vaporizer.
17,01 € 18,90 € -10%Reduced price! - 21,00 € Immediate dispatch
Dynavap Dosing Capsule - Standard (5-Pack)
Kit of 5 officialdosing capsules for Dynavap standard tips. Very practical for preparing your vaping sessions while limiting the need to clean the bowl and grid of your Dynavap vaporizer, they will quickly become indispensable on all your travels. Dynavap capsules are supplied in a tube, perfect for discreet transport. This tube also comes in very handy...
21,00 € - 9,50 € Immediate dispatch
22mm Quartz Insert
Quartz insert Ø 22 mm with titanium grid offered by Cannabis Hardware for use with the Haze Pipe, the Blaze Pipe or the Matrix Bowl. The grid effectively limits the undesirable absorption of plant matter during inhalation.
9,50 € - 45,00 € Immediate dispatch
20 mm XLR coil with handle
Heater coil, diameter 20 mm, with silicone handle for better grip, to be connected to a PID controller on a plug (US 110V or European 220V), via the XLR connector.
45,00 € - 35,90 € In Stock
Verre Tafée Bowle
35,90 € - 35,90 € In Stock
Verre Tafée Bowle Series II
35,90 € - 99,00 € Immediate dispatch
Potter Herb Shredder Series II
Grinder specially designed by Tafée for the Bowle Series II. With its exemplary finish, it grinds your herbs perfectly and fills 4 Bowle Series II Oven Pots directly. Ingenious and formidably efficient, it's fast becoming a must-have! ⚠️ Please note: This grinder is optimized for use with Tafée Bowle Series II.
99,00 € - 40,00 € Immediate dispatch
Tinymight Jacket Leather Case - TS Wooden...
Protect your Tinymight vaporizer (any model) with the TS Wooden Art premium leather case, designed to combine elegance and functionality. Made from genuine leather, this easy-to-install protection secures your device while adding a touch of sophistication to your vaping experience.
40,00 € - 180,00 € Immediate dispatch
Infinity Poker TS Wooden Art
The TS Wooden Infinity Poker is a luxurious wood, glass and stainless steel pipe ideal for cooling vapor from vaporizers with a Ø 10 or 14 mm ♂ male mouthpiece, such as Dani Fusion* or Dynavap. The Infinity Poker Stem (the stem alone) can also be used directly as a mouthpiece for Dynavap. Elegant and highly effective! * Add an O-ring to the Fusion tip to...
180,00 € - 86,00 € In Stock
Infinity Stem for BFG, Stunner & Dynavap
TS Wooden Art 's Infinity Stem is a premium exotic wood and borosilicate glass mouthpiece for advanced cooling with your Dani, Dani Fusion, Stunner or Dynavap vaporizer (by adding a gasket to the tip, see below). Note: to mount a Dynavap tip on this stem, add an O-ring (OD 8.0 CS 1.5). Not recommended for Hyperdyn.
86,00 € - 60,00 € Immediate dispatch
Short Infinity Stem for Tinymight
The short Infinity Stem is a premium mouthpiece in exotic wood and borosilicate glass for advanced cooling with your Tinymight or Tinymight 2 vaporizer, offered by TS Wooden Art. If you like this stem but want more cooling, you can opt for the long version.
60,00 € - 80,00 €
Long Infinity Stem for Tinymight
The Infinity Stem long is a premium mouthpiece in exotic wood and borosilicate glass for advanced cooling with your Tinymight or Tinymight 2 vaporizer, offered by TS Wooden Art. If you like this stem but prefer a more compact format, you can opt for the short version.
80,00 € - 9,90 € Immediate dispatch
Dab Mat in Platinum-Cured silicone QaromaShop
This premium silicone dab mat QaromaShop helps prevent soiling when spraying concentrates, while stabilizing your dab rig/vaporizer by positioning them on it. It can also cushion the fall of glass parts such as banger or carb cap. It stands out from the rest thanks to its top-of-the-range, resistant and easy-to-clean silicone.
9,90 €
