No products
Catalog
Universal silicone adapter Orion 3-in-1 for vaporizer portable Mighty / Crafty+ This adapter features a 3-in-1 joint, 10, 14 and 18 mm male Very practical for connecting your vaporizer portable Storz & Bickel Mighty or Crafty+ to your favorite water filter. Finally, an unbreakable soft silicone adapter for your vapo. Out of stock? Choose a Ø 14 or 18...
Stainless steel cooling unit for Crafty+ portable vaporizer . This stainless steel cooling unit allows you to cool your vapor, the freshness brings out the aromas of your plants and resins. Titanium mouthpiece and glass mouthpiece. The Crafty stainless steel cooling unit is delivered in an ultra compact plastic carrying case.
Stainless steel cooling unit for Mighty portable vaporizer This stainless steel cooling unit allows you to cool your vapor, the freshness brings out the aromas of your plants and resins. Titanium mouthpiece and glass mouthpiece included. The Mighty stainless steel cooling unit is delivered in an ultra compact plastic carrying case.
The aerotube for Mighty / Crafty+ / Crafty vaporizer is a glass tube that creates a very long vapor path for efficient vaporization. The aerotube fits in place of your Mighty / Crafty+ / Crafty cooling unit and allows you to improve the flavor.
The side kit is a kit for Mighty / Crafty+ / Crafty portable vaporizer. The Side Kit is the perfect little kit to start off on the right foot with your favorite portable vaporizer.
The OmniVonG Vaporizer is a portable vaporizer with wooden body and a mouthpiece made of titanium from Dynavap. Composed of wood, titanium and steel, it’s light, robust and quickly loses the accumulated heat in the body. The Cape is made in stainless steel as for all Dynavap vaporiser. Turbo lighter, a carry case, mix of plants for free.
Flexible body for Herborizer Ti, XL and DigiTi vaporizer systems in 18,8 mm. This flexible body allows you to use your Herborizer vaporizer dry, without going through water filtration. A hotter but tastier vapor.
The Nitecore SC2 super charger is a high end intelligent charger for your batteries. It analyzes the status and the required charge and adapts it to your battery. Up to 3 A. Charges two batteries independently and charges via USB - not all three at the same time. Intelligent battery charger for all cylindrical batteries Li-ion / IMR / LiFePO4 / Ni-MH / NiCd
The Dynavap titaniul tip is the bowl of many portable vaporizer at Dynavap Entirely made of titanium and supplied with a pre-installed screen
The silicone Multi-Stand for portable vaporizer and accessories is compatible with a large number of products in our catalog.
Dynakit Deluxe: Deluxe maintenance kit for DYNAVAP vaporizers. This Deluxe maintenance kit contains a torch lighter and some replacement parts for most DYNAVAP vaporizers. Gaskets, grids, fiber, tubes, etc...
VapCap Dynavap portable vaporizer tube from classic like M 2018, 2019, 2021
Petit cone is a mini bong perfect for filtering the vapor from your vaporizer. With its 14mm female joint it is compatible with most vaporizers as long as you have the part to connect them to. Made in China for Katalyzer - glass thickness 2 mm
The XMAX ACE portable vaporizer with its bowl emptying system, its temperature adjustable to the nearest degree and its removable 18650 battery, has a black ceramic bowl that offers a very good flavor. The ACE is a very good conduction vaporizer, a quality of vape just behind the DaVinci IQ2 vaporizer at a very competitive price.
Dynabulle is a simple and complete kit that allows you to mount your Dynavap portable vaporizer on the bubbler provided. For this we have chosen Phil Trator, dynawax and an adapter for 10, 14 and 18 mm bongs on which you will only have to place your Tip Dynavap.
This glass bong is the bubbler that comes with the Herborizer Bubbler Ti vaporizer. Available alone, this glass bubbler Herborizer is compatible with most vaporizers on the market
Two caps for your glass tube(s) of TinyMight Vape portable vaporizer. Very useful to prevent dust from entering your tube when your vaporizer is in your pocket or in a bag for example.
The 2020 M Starter Pack gets you started on the right foot with your Dynavap Vapcap portable vaporizer. Complete pack ready to vaporize - butane gas to be purchased and needed because lighter empty.
The Dynavap Captive Cap has the particularity of holding better to the Dynavap Tips, of creating a better draft and of turning on itself.
An official 18350 Li-Ion, 1100 mAh battery for your DaVinci MIQRO and MIQRO-C portable vaporizer. Original DaVinci product.
The BB9 Pink from Dynavap is the perfect accessory to connect your VapCap to a bong or other water filter. With its 10mm AND 14mm female joint it will fit almost any bubbler. The glass beads in the tube allow for a cooler vapor for dry vapers. Supplied without the Cap, Stainless Tip or Ti Tip that you need to use your BB9 Dynavap.
The BB9 Grey from Dynavap is the perfect accessory to connect your VapCap to a bong or other water filter. With its 10mm AND 14mm female joint it will fit almost any bubbler. The glass beads in the tube allow for a cooler vapor for dry vapers. Supplied without the Cap, Stainless Tip or Ti Tip, which are necessary to use your BB9 Dynavap.
The Lil Packer is a plant filling tool for your PAX 2 or PAX 3 vaporizer.
With the vaporizer Volcano Classic SE Gold Plated edition, Storz & Bickel celebrates its 20th anniversary with a collector's Volcano! ⚠️ This vaporizer comes with a European plug and cannot be used in the USA or Canada. ℹ️ Cheaper elsewhere? See our offer below!
Bang made of high quality borosilicate glass, the Herborizer sphere is compatible with any vaporizer equipped with a bong adapter with 18 mm male/female joint
The 2020 "M" is the current version of the 2019, 2018 and 2017 VapCap with still a medical grade stainless steel body AND a new finish. Take advantage of our offer to discover the purity of flavors with a glass body for 14 euro extra or 9,9€ discount. To take advantage of this offer, see under the "Buy" button. If you don't need a lighter at home, you can...
The Dynavap Maker's Kit is a kit that allows you to make your own Dynavap vaporizer and make it unique as you will be carving the wood that makes the body of your VapCap vaporizer. It comes with everything you need to create an inimitable VapCap vaporizer.
TinyMight Vaporizer Long Tube - with its 55mm length it is the same as the original one sold with your TinyMight Vaporizer. This tube is made of quartz, it replaces the classic tube/mouthpiece that comes with your TinyMight Vaporizer.
Long tube for TinyMight Vaporizer - to get a fresher vapor thanks to its length of 80 mm instead of 55 mm This tube is made of quartz, it replaces the classic tube / mouthpiece provided with your TinyMight Vaporizer
This small peroxidized silicone bubbler Eyce Mini Beaker could be the best travel companion for your portable or coffee table vaporizer. With its 14mm female joint it is compatible with most vaporizers on the market. Comes with a glass socket (for decoration).