No products
Catalog
The Voopoo Drag X Plus Kit with the GLow RCV 18 V3 is perfect if you're looking for a 100% convection vaporizer with on-demand puffing. Requires a bit of learning - recommended for advanced or knowledgeable vapers.
Includes titanium Flower Pot screen for VRod and Weedeater or for B-Zero, B1, B2 and Injector Diffusor
A replacement head for your FlowerPot Weedeater or to convert your Vrod flowerPot into a Weedeater.
The "De Verdamper" is a living room vaporizer, invented by "Evert Verdamp" in 1995 following experiments with a heat gun and a bong. De Verdamper is a top-of-the-range stationary vaporizer, combining a vaporizer and a water filter for a gentle aromatherapy experience full of aromas. Photo non contractual
The Shell-Shock stem for Dynavap is a small revolution in the Dynaverse. It offers the particularity of an adjustable air flow, a devissable condenser, it is without any seal and is very easy to clean. Only 1250 copies were produced - a victim of its own success.
Vortex in blackwood and its Intercooler from Simrell Collection for Dynavap VapCap systems A thick and ultra fresh vape guaranteed! Sold without TIP or CAP Dynavap. Be careful if you choose the Blackwood Vortex and the intercooler only you will not be able to use it unless you are already equipped with a tip and a Dynavap cap.
For plants and resins the FlowerPot B1 Injector Essentials Bundle is THE vaporizer manufactured by Cannabis Hardware (ex NewVape) dedicated to a strong bang type extraction. Supplied with a 220V European plug.
The Dobby V2 is a small 100% convection wooden vaporizer that consists of two magnetized parts. It works with a storm lighter (included). Its fine airflow allows for large puffs.
Similar to the VapCap M in its operation, the Silencio is a mechanical portable vaporizer: a manual heat source, preferably a storm lighter, is used to raise the temperature in the filling chamber. However, any heat source can be used if necessary!
Recycler type Klein which will delight the amateurs of bangs with its 20 cm height.
Compatible with the vaporizer Crafty and Mighty by Störz&Bickel, this piece has to be placed instead of the mouthpiece and its bowl. Allows you to connect your vaporizer Crafty and Mighty directly on a bong / water pipe. Diameter of the joint: 14 or 18mm.
The 2020 "M" in its Azurium version is the current version of the 2019, 2018 and 2017 VapCap with still a medical grade stainless steel body AND a new finish. Take advantage of our offer to discover the purity of flavors with a glass body for 15 euro extra or 9,9€ discount. To take advantage of this offer, see under the "Buy" button.
The 2020 "M" in its Rosium version is the current version of the 2019, 2018 and 2017 VapCap with still a medical grade stainless steel body AND a new finish. Take advantage of our offer to discover the purity of flavors with a glass body for 15 euro extra or 9,9€ discount. To take advantage of this offer, see under the "Buy" button
The 2020 "M" in its Phantom version is the current version of the 2019, 2018 and 2017 VapCap with still a medical grade stainless steel body AND a new finish. Take advantage of our offer to discover the purity of flavors with a glass body for 15 euro extra or 9.9€ discount. To take advantage of this offer, see under the "Buy" button.
A box, like the original, to replace your filling chamber for vaporizer portable Kalys Katalyzer.
The Dynavap titaniul tip is the bowl of many portable vaporizer at Dynavap Entirely made of titanium and supplied with a pre-installed screen
This mouthpiece/stem makes a fresher vapor and brings out the flavors. Ideal if you are looking to refresh your vapor without making it wet.
Dynatec's Orion V2 portable induction heating system is specially designed for Dynavap VapCap vaporizers Compatible with stainless tips and titanium tips. Allows you to heat up your Dynavap in 5 to 8 seconds.
This standard condenser is made to fit most of Dynavap Vapcaps. It fits most 92mm VapCap vaporizers. It can also be used in any stem length (62mm) midsection that does not incorporate one of the spinning mouthpieces, or it can be used with a body length (45mm) midsection where a mouthpiece is required.
This mouthpiece/stem makes a fresher vapor and brings out the flavors. Ideal if you are looking to refresh your vapor without making it wet.
Mouthpiece made of opaque black glass or stem, essential accessory for any user of the vaporizer Arizer Solo or Arizer Air! Exist in two forms: Long and short. Compatible with your vaporizer Arizer Solo, Solo 2 and Arizer Air.
The BB3 from Dynavap is the perfect accessory to connect your VapCap to a bong or other water filter. With its 10mm female joint it will fit almost any water filter (especially small American ones). The glass beads in the tube allow a cooling of the vapor for the amateurs of dry vape. Supplied without cap, stainless tip or Ti tip, which are necessary to...
Glass mouthpiece for your X-MAX V2 Pro vaporizer. Available in a bong adapter version or mouthpiece. The X-MAX V2 pro is already an excellent vaporizer but for the purists and/or for the water pipes/bongs owners, here are 2 accessories that are necessary!
Universal adapter Katalyzer 3-in-1 for Fenix Mini portable vaporizer. This adapter has a 3-in-1 joint, Ø 10, 14 and 18mm male. Very handy for connecting your Fenix Mini portable vaporizer to your favorite water filter.
Large 14mm to 10mm male to female adapter for water pipe and vaporizer Adapter for pipe and water filter, to transform your 14mm female joint into a 10mm female joint. Glass element to connect your vaporizer to a pipe / water filter (bong) Adaptable to all standard bongs
The Efest iMate R4 is a high-end intelligent charger for your batteries. It analyzes the state of charge and the charge required, and adapts it to your battery. Charges up to 2 times 2.0 A and 3A Charges four batteries independently and charges via USB C Intelligent battery charger for all cylindrical batteriesLi-ion / IMR / LiFePO4 / Ni-MH / NiCd ℹ️ You...
Mouthpiece / Stem for Solo 1 / Solo 2 and Air 1 / Air 2portable vaporizer Glass mouthpiece called Stem! Compatible with your Arizer Solo, Solo 2 and Arizer Air vaporizer
The induction heater made of rubberwood (Ficus elastica) fromOrion is specially designed for VapCap Dynavap vaporizers. Compatible with stainless and titanium tips. Heats your Cap Dynavap in 5 to 8 seconds.
After the AirVape X, the AirVape brand is back with the Legacy vaporizer, a particularly refined model. The Legacy is a portable vaporizer that features a gold chamber, session or on-demand convection heating and unique and innovative features. NB: This vaporizer is a very good model that requires a little learning, like the Firefly2+.
This glass bong is the bubbler that comes with the Herborizer Ice Tube XL System vaporizer.Available on its own, this glass Ice Tube body Herborizer is compatible with most vaporizers on the market
Bubbler in 3 mm thick glass, 20 cm high. Homer Debulle is a small bubbler equipped with a 14 mm female joint, a showerhead plunger with 7 slots, and a small donut to cool down the steam a little more.
This hydratube is compatible with Mighty, Mighty+, Crafty and Crafty+ vaporizers. Mini hydratube with fine mouthpiece for your favorite vaporizer Storz & Bickel .