No products
This complete cooling unit for your Fenix Neo portable vaporizer lets you replace the upper part of the device. For a fresh start. Supplied with zircon ceramic mouthpiece.
Non-slip, heat-resistant silicone mat, ideal for placing under a bubbler, debowler, ashtray or other jar to secure them.
Official bubbler adapter (WPA) for mounting your Lotus vaporizer from Inhale on a water/air filter featuring a female ♀ Ø 14 mm joint. Ideal for effectively refreshing vapor during your mechanical vaping sessions!
ENSŌ is a brand-new type of transportable electronic hookah vaporizer (also known as Weesha, a contraction of weed and shisha) that can be used thanks to its elegantly magnetically attachable pipe on the side of the device. It was designed by Airvape in collaboration with shisha specialists. With its water filtration, it can vaporize herbs, resins,...
Injector-type firebox made entirely of glass, including the grate, to guarantee the most authentic flavors possible. Features a small right-hand side handle for easy handling, even after heating. Produced by the French brand Katalyzer. Compatible with Ø 18 mm water filters and with the heating element of the Elev8R, GlassHeater or FlowerPot.
Silicone tube with glass mouthpiece and Ø 14 mm adapter for water filters. Perfect for improving the ergonomics of your globe or cube bubblers, or replacing the one on your Globe Laure Bitume or Cube fumé.
The aerotube for Venty vaporizers is a 3D glass mouthpiece studded with spikes to refresh the vapor while preserving neutrality in the rendering of flavors. This accessory replaces the Venty's original plastic mouthpiece. ℹ️ This accessory is not an official Storz & Bickel product and was designed by the French vaporizer and accessory brand Katalyzer.
Official replacement aerotube mouthpiece for Katalyzer Air Mess filter. Provides better vapor cooling thanks to its spikes and greater comfort of use thanks to its curved mouthpiece.
Adapter for water filters (WPA), to transform the female joint ♀ Ø 14 or 18 mm of a bubbler into a male joint ♂ Ø 10 or 14 mm. Glass element designed by Katalyzer to - for example - connect your vaporizer to a water pipe (bong) featuring a different-sized joint.
Adapter for Ø 18 mm (WPA) official glass water filters for XMax Riggo concentrate vaporizers. Allows you to adapt your Riggo to a water filter with a female joint ♀ Ø 18 mm and thus effectively refresh the vapor while maintaining excellent aromatic rendition.
This glass mouthpiece for the VAPTER portable vaporizer from Katalyzer is the same as the original, with a touch of fantasy thanks to the extra colors. The choice of glass as a material ensures greater flavor neutrality thanother materials such as titanium.
Glass adapter mouthpiece for water filters (WPA) for the Weha portable vaporizer from Katalyzer. Fits any water filter with a 14 mm female connector.
3D mouthpiece (aerotube) for VAPTER portable vaporizer from Katalyzer (also know as XMax V3 Nano), offering fresher vapor than the original mouthpiece thanks to the spikes in the vapor path.
The titanium mouthpiece for VAPTER portable vaporizers from Katalyzer is more durable than the original glass mouthpiece.
The future is almost in your hands with the Anvil Vestratto™ ThermoCore. The result of more than several years of research and innovation, this vaporizer offers an optimal extraction experience with a minimum number of heat-ups. The latest April 2024 version incorporates the new ThermoCore bowl, with a 50% greater layer of copper for faster, more even...
The Arizer Solo revolutionizes itself with this third version full of new features! It retains the qualities that have already made the range a success, and adds faster heating, a new heating mode (on demand), a double bowl capacity (0.25 or 0.5 g of herbs) as well as a system of preset temperatures and a much easier-to-read color screen.
Official replacement glass cap to fit over the atomizer of the XMax Riggo concentrate vaporizer. Ideal if you've lost or broken the original one!
Ø 14 mm official glass water pipe adapter (WPA) for XMax Riggo concentrate vaporizers. Allows you to adapt your Riggo to a water filter with a Ø 14 mm ♀ female joint, effectively refreshing the vapor while retaining excellent aroma.
Official glass replacement mouthpiece for XMax Riggo concentrate vaporizer. Perfect in case of loss or breakage of the original mouthpiece!
Official replacement silicone pipe for XMax Riggo concentrate vaporizer. Perfect in the event of damage or loss of the original!
Official replacement 3D cooling mouthpiece (aerotube) for Siroko VAP vaporizer from Katalyzer. Spikes along the vapor path effectively cool the vapor before it enters your lungs while preserving your terps.
This 3-in-1 accessory enables you to adapt your Boundless Tera vaporizer to a water filter fitted with a Ø 14 or 18 mm ♀ female joint or a 10 or 14 mm ♂ male joint (by unscrewing and then screwing the male joint back on the other side, see photo no. 2). Cooling with water enables longer, deeper inhalation while limiting throat irritation, for excellent...
This useful accessory, selected for you by Katalyzer, effectively extends the life of your glassware by securing the joints between the various parts. You'll be able to handle your water filter more comfortably, preventing fragile parts from falling out and reducing play (floatation) between your various parts.
Complete mechanical convection vaporization kit, with excellent steam cooling thanks to its elegant glass helical intercooler. Convection vaporization now even more accessible thanks to Vaphit!
A set including a ready-to-use mechanical vaporizer with adapter for Ø 14 mm water filters. With its low price, it is nonetheless very complete and generous in accessories and spare parts.
The VapHit Eco Kit is a new small portable mechanical vaporizer with quartz heating from Vaphit. The vapo is supplied in a very complete kit, with a generous range of accessories, at an unbeatable price! Convection vaporization, now even more accessible thanks to Vaphit!
This injector has been designed by Camouflet to be heated with the Inductor or a PID controller with a Ø 20 mm coil. It is based on the same technology developed for the Convector, but on a larger scale and with temperature control.