Rubilyzer

Outstanding flavor rendition and impressive vapor production guaranteed on this very affordable Rubilyzer Ball Vape kit from French brand Katalyzer.

Features :

• Materials: grade 2 titanium, stainless steel, synthetic rubies (already installed), borosilicate glass, silicone and wood
• Bowl capacity: maximum 0.4 g (but also very effective in microdosing, with 0.05 g for example)
• Recommended temperatures: 270 to 330°C
• Stand with non-slip feet for placing the still-warm coil
• Crossing Ruby Twist Injector

When you buy a Rubilyzer, you get :

• 1 x Rubilyzer injector (titanium housing, pre-filled with ruby)
• 1 x Rubilyzer Micro PID controller
• 1 x 20 mm heating coil with silicone handle
• 1 x glass adapter bowl with grid and 14 mm side perforation
• 1 x cap for 14 mm glass bowl
• 1 x 14 to 18 mm male adapter
• 1 x keck clip 18 mm
• 1 x steel stand
• 1 x European power cable (220 V)
• 1 x spoon and tamping tool
• 2 x grids 16 mm
• 2 x grids 18 mm
• 3 x spare housing screws
• 1 x Allen key
• 1 x wooden cleaning brush
• 1 x user manual (in English, transcribed by us below)+

Instructions for use :

Installing and setting up the Rubilyzer :

Prerequisite: water/air filter with 14 or 18 mm female joint.

1. Unpack the kit, then connect the power cable between the back of the controller and a power outlet.
2. Connect the housing cable to the front of the controller.
3. Place the housing on its stand.
4. Switch on the controller by pressing the central button for 3 seconds.
5. Adjust the temperature to 380°C using the ➖ and ➕ buttons and let it heat up for 5 minutes (at the very first launch) to get rid of any residues related to the design of the Rubilyzer parts.
6. Place the adapter bowl on the bubbler of your choice. If your bubbler has an 18 mm female joint, use the 14 to 18 mm male adapter, then secure with the keck clip supplied.

ℹ️ When the controller is switched on, 5 clicks on the central button start the automatic switch-off function, adjustable from 0 to 5 hours. Once the timer duration has been selected, press the central button again to confirm.

Using the Rubilyzer :

1. Set the temperature to 290 ℃, wait for it to stabilize. The suggested temperature is for guidance only, so feel free to do your own tests.
2. Using the spoon provided, drop the quantity of crushed flowers (ideally medium grind) into the adapter bowl. Do not pack, to allow the hot air to circulate and ensure even vaporization.
3. Place the adapter bowl on the bubbler of your choice.
4. Place the housing on the adapter bowl, hold it in place and inhale (gently) through the mouthpiece of your bubbler. Repeat until your flowers are sufficiently vaporized (light to dark brown, avoid black!). If you've loaded more than a spoonful of flowers, it's a good idea to stir the bowl after 2 or 3 inhalations.
5. Carefully remove the adapter bowl, turn it upside down and brush off any plant residue.
6. After the first bowl, adjust the temperature if you wish. We recommend a temperature of between 270 and 330 ℃. Lower temperatures will preserve flavors better with less steam production, while higher temperatures produce plenty of steam but flavors will stay less long.
   Higher temperatures can be used, but it is recommended to start below the recommended temperatures to avoid any risk of burning your plants.

• Celsius/Fahrenheit: Hold down the + button for 5 seconds when the PID is off. Then press the + button again to switch from C to F. Press the central button to exit.

⚠️ Do not leave the injector / housing on the adapter bowl while it is heating up. Prefer the stand provided to avoid breakage.

Cleaning :

• There's no need to clean the Rubilyzer housing.
• Simply brush the grid on the adapter bowl after use to remove any debris, and dip it in a cleaning solution such as isopropyl alcohol after a while. You can also easily replace it if necessary.
• Glassware can be immersed in iso alcohol, then rinsed with hot water. Wait for the piece to dry before use.

⚠️ Glass is not covered by warranty, so we advise you to shake your package before signing for its reception and to sign with reservation if in doubt. In case of broken glass upon receipt, you have one hour to report it to us, otherwise no request can be accepted.

☎️ For any questions before or after purchase, our team of enthusiasts is at your disposal on our vape hotline at +33 1 83 64 69 26 from 11 am to 7:30 pm from Monday to Friday, and from 12:30 pm to 7:30 pm on Saturday. You can also place an order directly over the phone if you wish.

If you want to buy a vaporizer in Paris, our vaporizer shop is 500 meters from the République metro station, at 16 boulevard de Magenta, 75010 Paris.