Divine Crossing Version 5 Crucible

To use and complete this atomizer, you will need an electronic cigarette mod. We recommend the iStick Pico 2, the Aegis Solo 100W or the Aegis Legend 200W.

Features:

• Materials: to come;
• Dimensions: to come.

Buy a Divine Crossing V5, is to receive :

• 1 x complete V5 atomizer (ready to use);
• 1 x spare ceramic heating bowl top and bottom;
• 1 x replacement glass ;
• 1 x dabber ;
• 4 x spare screws,
• 1 x wrench ;
• 2 x O-rings;
• 5 x cotton swabs ;
• 1 x user manual in English (translation to come below).

Usage:

⚠️ Caution, the heater cup can rise to a temperature of 355 ℃ (600 ℉) and can cause severe burns.

ℹ️ Each part is replaceable, the atomizer can be completely rebuilt, no need to throw away the whole heater if a part breaks.

Wattage: 27-37W Pulsing button

TCR Value 200 using 36W to reach 500°F

In any case, we recommend you to experiment with different settings. Some mods give off more power than others at the same settings. To preserve the walls and bottom of the ceramic heater cup, start with low settings, then gradually increase until you are satisfied.

Always keep your O-rings clean and lubricated with the vegetable oil of your choice. This ensures easy handling.

1. Place a small amount (2-5 taffs maximum) of concentrate in the ceramic cup.
2. Keep the atomizer upright throughout the session to avoid spillage of concentrate. Press the button on your mod to start heating and begin vaping your extraction.
3. Inhale gently to produce the maximum amount of vapor while avoiding splashing. Make sure to keep the heat on throughout the session. It should not last more than one minute.
4. Keep the temperature low enough to avoid burning your concentrates. Always clean the cup right after use to maintain cleanliness and performance. Wipe and clean the glass while it is still warm to avoid reclaim build-up in the steam path. Wait 3 minutes for the unit to cool before restarting a session.

Video demonstration: