Flare

Features :

• Power range: 30 to 120 W
• Operates with 3 18650 Molicel batteries (not included)
• USB-C charging (cable supplied)
• Glass chamber diameter: Ø 5.5 cm
• Dimensions: 6.6 x 13.5 x 3.8 cm
• Weight: 217 g without battery (352 g with)

Compatibility :

• Dani V3 / V3 Ti with IH cap
• Dani Fusion 2.0 (100 W recommended for approx. 45 seconds on first warm-up, 15 on subsequent warm-ups)
• Dani Fusion
• Dynavap (60 W with Vaphit Silver Collar recommended to help detect your vapo)
• Anvil (maximum 95 W with Copper Jacket)
• Tempest (maximum 70-75 W)
• Thermal Accumulator
• Stunner
• ... and much more!

How to use The Flare :

• Switch on/off: press the power button three times quickly
• Pre-heating: adjust the power (30 to 120 W) using the side buttons, or activate Boost mode by holding down both side buttons for 2 seconds. To set a countdown (up to 16 seconds), press the power button twice, then use the side buttons.
• Toadjust the heating height: use the magnetic tool supplied (in the battery compartment).
• To use: insert the chamber filled with the mechanical vaporizer of your choice into The Flare's glass chamber. Heating starts automatically. Power will be reduced if your batteries are unsuitable.

N.B. For optimum performance and long life, use an external charger for your batteries rather than The Flare's USB-C port.

☎️ For any questions before or after purchase, our team of enthusiasts is at your disposal on our vape hotline at +33 1 83 64 69 26 from 11 am to 7:30 pm from Monday to Friday, and from 12:30 pm to 7:30 pm on Saturday. You can also place an order directly over the phone if you wish.

If you want to buy a vaporizer in Paris, our vaporizer shop is 500 meters from the République metro station, at 16 boulevard de Magenta, 75010 Paris.