No products
Dynavape est un fabricant de vaporisateur américain.
Spécialiste de vaporisateur portable Dynavape vaporizer c'est toute une gamme de vaporisateur portable ingénieux et très efficaces.
Fonctionnant avec un briquet et indiquant que la température de vaporisation est atteinte par le son d'un "Clic", les VapCap Dynavap sont de très bon petit vaporisateur portable pas cher mais efficace et sain d'utilisation
Dynavap is an American brand of plant and resin vaporizers.
Entirely made in the USA, the VapCap vaporizers are very small and work with a torch lighter or an induction heater.
Dynavap offers many models of VapCap, the M which gets a new outfit every year, the Vong for bangs, bubblers and other water filters such as hydratube, and the Omni all made of titanium.
A titanium chamber offers a much better heat distribution.
The second edition of the XL condenser in Titanium Dynavap with adjustable airflow
The Armored Cap is a much thicker cap than the original one sold with your vaporizer Dynavap.Its big advantage is that it allows to make only one heating to extract all the active ingredients of your herbs. It delivers thicker inhalations, saves on lighter gas and also produces a slightly hot and dense vapor.
The 2019 "M" in its AuruM version is the current version of the 2017 VapCap, with still and again, a 100% medical grade stainless steel body, but a new finish, on the body and tip.
The BB3 from Dynavap is the perfect accessory to connect your VapCap to a bong or other water filter. With its 10mm female joint it will fit almost any water filter (especially small American ones). The glass beads in the tube allow a cooling of the vapor for the amateurs of dry vape. Supplied without cap, stainless tip or Ti tip, which are necessary to...
Dynavap's BB6 Blue is the perfect accessory for connecting your VapCap to a bong or other water filter. With its Ø 10 and 14 mm female joints, it will fit almost any bubbler. The glass beads in the tube cool the vapor for dry vapers. Sold ready to use, with Dynavap tip and cap.
The BB6 Pink from Dynavap is the perfect accessory to connect your VapCap to a bong or other water filter. With its 10mm AND 14mm female joint it will fit almost any bubbler. The glass beads in the tube allow a cooling of the vapor for the amateurs of dry vape (without water). Sold ready to use, with tip and Dynavap cap.
Dynavap's BB6 is the perfect accessory for connecting your VapCap to a bong or other water filter. With its 10 and 14 mm female joints, it will fit most bubblers. Glass beads in the tube cool the vapor for dry vaping enthusiasts. Supplied without Cap, Stainless Tip or Ti Tip, which are necessary to use your BB6 Dynavap.
Dynavap's BB6 is the perfect accessory for connecting your VapCap to a bong or other water filter. With its 10 and 14 mm female joints, it will fit most bubblers. Glass beads in the tube cool the vapor for dry vaping enthusiasts. Supplied without Cap, Stainless Tip or Ti Tip, which are necessary to use your BB6 Dynavap.
Dynavap's BB6 is the perfect accessory for connecting your VapCap to a bong or other water filter. With its 10 and 14 mm female joints, it will fit most bubblers. Glass beads in the tube cool the vapor for dry vaping enthusiasts. Supplied without Cap, Stainless Tip or Ti Tip, which are necessary to use your BB6 Dynavap.
The BB9 Grey from Dynavap is the perfect accessory to connect your VapCap to a bong or other water filter. With its 10mm AND 14mm female joint it will fit almost any bubbler. The glass beads in the tube allow for a cooler vapor for dry vapers. Supplied without the Cap, Stainless Tip or Ti Tip, which are necessary to use your BB9 Dynavap.
The BB3 from Dynavap is the perfect accessory to connect your VapCap to a bong or other water filter. With its 10mm female joint it will fit almost any water filter (especially the small American ones). Supplied without the Cap, Stainless Tip or Ti Tip, which are necessary to use your BB3 Dynavap.
The BB9 Pink from Dynavap is the perfect accessory to connect your VapCap to a bong or other water filter. With its 10mm AND 14mm female joint it will fit almost any bubbler. The glass beads in the tube allow for a cooler vapor for dry vapers. Supplied without the Cap, Stainless Tip or Ti Tip that you need to use your BB9 Dynavap.
Using the heating system of the Dynavap VapCap vaporizer, this kit that is heated with a lighter, rather than an electronic device will allow you to vaporize your plants or resins via a water filter. Save more than 20 euro with this kit and enjoy the Dynavap technology at a lower cost.
The Dynavap Captive Cap has the particularity of holding better to the Dynavap Tips, of creating a better draft and of turning on itself.
The captive cap LCV X Dynavap is a limited collector's edition made for our 10th anniversary The captive cap offers the particularity to hold better to the Dynavap Tips, to create a better draw and to turn on itself.
A very resistant official sticker with an aesthetic and "carbon fiber" texture to personalize your Orion V2 Dynatec induction heater. The sticker is very easy to apply and holds firmly while bringing a modern and classy touch to your case.
A pair of Dynavap "Pass the VapCap" socks, for an even closer experience with warm feet. One size only.
A "Cap Dynavap" beanie, to live the experience even closer with a warm head. Finally a little visibility on the slopes or at the beach! One size only.
Contains 2 condenser seals and 1 mouthpiece seal for VapCap.
Can't decide between a single or double lighter? No need to choose anymore with this 2-in-1 lighter, designed by Dynavap to be durable, easy to use and convenient. This bright, durable and portable lighter offers the ability to be switched from single to dual flame at any time, even when you are operating it.
Dynabulle is a simple and complete kit that allows you to mount your Dynavap portable vaporizer on the bubbler provided. For this we have chosen Phil Trator, dynawax and an adapter for 10, 14 and 18 mm bongs on which you will only have to place your Tip Dynavap.
The DynaCherry is a portable, non-electric vaporizer that works with a torch lighter. With its sound-activated temperature control, it's a great portable vaporizer. Flavor rendering and ease of use. Turbo lighter included.
The DynaCigarillo Havana is a rare wood stem, also called a stem, with a length of 45 mm compatible with your Dynavap tip. The DynaCigarillo Havana is available in several rare wood species: Maple, Snake, Ebony.
The DynaCigarillo Havana is a rare wood stem, also called a stem, with a length of 62 mm compatible with your Dynavap tip. The DynaCigarillo Havana is available in maple.
The Dynaclean Kit allows you to clean your Dynavap vaporizer and its accessories in a simple and efficient way.Delivered with the DynaClean solution and two transporttubes.Composition of the solution below.
The Dynacoil Dynavap is a very practical accessory to vaporize your concentrates like C...B. crystal with your Vapcap. The dynacoil is installed in the tip of your Dynavap vapcap, as simple as that.
Emergency kit for DYNAVAP vaporizers. This kit contains some replacement parts for most DYNAVAP vaporizers. Gaskets, grids, tubes, etc...
Dynakit Deluxe: Deluxe maintenance kit for DYNAVAP vaporizers. This Deluxe maintenance kit contains a torch lighter and some replacement parts for most DYNAVAP vaporizers. Gaskets, grids, fiber, tubes, etc...
Emergency kit for Dynavap vaporizers. This maintenance kit contains a few replacement and maintenance items for most Dynavap vaporizers: O-rings, pipe cleaners and Dynawax wax.
The DynaMag by DynaVap is a small and powerful magnet allowing you to attach your DynaVap to any metallic object. Really handy because you won’t have to find a place to put your hot DynaVap on or it will give you a functional storing place at home.
The Dynastash in the pure tradition of one-hitter dug-outs is a very practical tool for any owner of a Dynavap VapCap vaporizer (small formats, check compatibility below).
The Dynastash, following the tradition of the dug-outs for one hitter is a really convenient accessory for any VapCap vaporizer’s owner. Compatible with the VapCap-S, the VapCap Original, the OmniVap, the Ti Woody and the “M”.