DynaCherry

Features:

• Material: cherry wood and stainless steel
• Mouthpiece compatible with water/air filters featuring a female joint ♀ Ø 10 mm
• Measurements: 10.2 x Ø 1.2 cm for 10 g

Contents:

• 1 x cherry wood stem
• 1 x stainless steel tip 2021
• 1 x captive cap
• 1 x carrying tube

About Dynavap:

• Faceted serrated tip (the herb/resin bowl) with a redesigned drawdown
• Adjust-a-bowl technology reduces bowl size by 50% for microdosing

The team at La Centrale Vapeur would like to point out that some marks are more or less visible on the cape. These are machining and welding marks. Some Capes show traces of heating; this is simply the metal reacting to the heat during welding or cutting. These marks or discolorations are completely normal, and do not interfere with the Cap's operation.

Dynavap's real innovation, present on all Dynavap Vaporizer portable vaporizers, is sound-based temperature control.

As soon as the vaporization temperature is reached (approx. 190 ℃), the cap (or the Cap) of the vaporizer emits a small "click" telling you to stop heating immediately. A second, louder click indicates that you really need to stop, as combustion is too close.

After a few seconds, as soon as the vaporizer is cool enough for the next heating cycle, a^3rd click is heard.

Your vaporizer Dynavap is then ready to be heated again, until you hear a click indicating that the vaporization temperature has been reached and the VapCap no longer needs heating. And so on.

In addition, a small hole located on the device, just below the mouthpiece, enables you to regulate the airflow more or less, and thus the density of your inhalations.

Finally, the way it works, vaporizer is perfect for resins.

The flavor and density of the vapor produced by the VapCap is amazing, and its size and ease of use are simply brilliant. A must-have for any self-respecting vaporizer aficionado in need of a portable yet qualitative vaporizer.

Instructions for use:

First of all, we advise you to practice with an empty vaporizer

• Remove the small metal cap (the captive cap) from the DynaCherry
• Fill the stainless steel bowl(not the cap) with dry crumbled plants or resin
• Close the cap
• Heat the DynaCherry on the side of the cap, while turning, until you hear a click

CAUTION: DO NOT HEAT FROM THE END! Only heat the sides of the cap!

• After the click, stop heating and inhale
• If you continue to heat after the^1st click, a second click will be heard, indicating that you absolutely must stop heating, as otherwise combustion will take place, and this overheating tends to damage the cap
• Before restarting heating:

• Wait for a^3rd click (or 30 seconds if you didn't hear anything) to let it cool down

• You can then start heating again until your bowl is completely vaporized
• You can then repeat the procedure and heat until you hear a click, and so on until your bowl is fully vaporized (dark brown plants and more vapor)
• To fill and empty the bowl of your DynaCherry, simply suck it up and blow it out

Be careful not to burn yourself, so remember to let the chamber cool down before putting your fingers into it.

Video and instructions for the Dynavap VapCap M (works identically to the DynaCherry) :