The M 2021 Fall Colors VapCap Dynavap

The 2022 "M" AutuM is the latest version of Dynavap's best selling, 100% medical grade stainless steel "M" VapCapIt is avaporizer portable,Not electric, which works with a torch lighter. With its temperature control by sound, it is a very good vaporizer portable. Flavor rendering and ease of use.

New improvements made by Dynavap's The 2022 M:

• Fall Colors 2022: AutuM and PrisM ;
• New Cape called "Captive Cap" ;
• Faceted serrated tip (the herb/resin bowl) with a redesigned draw ;
• Technology Adjust-a-bowl allowing to reduce the size of the bowl by 50% for microdosing ;
• Double air inlet called "Chiral"This means asymmetrical for high turbulence air injection ;
• Notched edges of the tip can be used as an extra grinder ;
• Mouthpiece with a diameter of 10 mm for some water filters.

The team of La Centrale Vapeur would like to inform you that on the Cape, marks are more or less visible. They are machining and welding marks. Some Capes show traces of heating, it is simply the metal which reacts to the heat during the welding or the cutting. These marks or discolorations are quite normal, and do not interfere with the operation of the Cap.

The real innovation of Dynavap, present on all the portable vaporizers of the brand Dynavap Vaporizer, is a temperature control by sound.

As soon as the vaporization temperature is reached (approx. 190 °C) the cap (or the Cap) of the vaporizer a small "click" indicates that you must stop the heating immediately. A second, louder click indicates that you should really stop because the combustion is too close.

After a few seconds, as soon as the vaporizer is cold enough for the next heating cycle, a 3^ème click is heard.

Your vaporizer Dynavap is then ready to be heated again until you hear a click indicating that the vaporization temperature has been reached and the VapCap no longer needs to be heated. And so on.

In addition, a small hole located on the device, just under the mouthpiece allows you to regulate more or less the air flow and therefore the density of your inhalations.

Finally, because of its operation, it is a vaporizer perfect portable for resins.

The flavors and the density of vapor produced by the VapCap is bluffing, its size and its simplicity of use are simply brilliant. To discover for any aficionado of vaporizers who respects itself and needs a vaporizer portable but qualitative.

Buy a vaporizer portable The 2022 "M" VapCap is to receive :

• 1 x vaporizer portable The 2022 "M" Fall Colors AutuM ;
• 1 x VapCap user manual ;

+ La Centrale Vapeur welcome kit :

• 1 x carrying case offered by LCV ; ;
• 1 x bag of 10 grams of plants (damiana or other) ;
• 1 x turbo lighter that will allow you to wait to buy a real lighter.

The 2022 "M" VapCap Technical Specifications:

• Stainless steel and medical silicone ;
• Very small = 92 mm ;
• Lightweight = 19.5 grams ;
• Heats up in seconds (3 to 5 seconds) with a storm lighter ;
• Can be heated with any heat source (candle, ember, light bulb, etc.) ;
• Very good aroma ;
• Temperature more or less variable with knowledge, depending on the location of the flame during heating

How to use the vaporizer The 2022 "M" VapCap:

First of all we advise you to train with a vaporizer empty of any substance

1. Remove the small metal cap from the "M" 2022 ;
2. Fill the stainless steel bowl of the "M" 2022 (not the cap) with dry crumbled plants or resin ;
3. Close the course of the "M" 2022 ;
4. Heat the "M" 2022 on the side of the cap, while turning, until you hear a click ;
   ATTENTION: DO NOT HEAT FROM THE END! But only on the sides of the cape !
5. After the click, turn off the heater and inhale ;
6. If you continue to heat after 1^er click, a second click will be heard indicating that it is absolutely necessary to stop the heating because otherwise the combustion will take place and this overheating tends to damage the heading ;
7. Before restarting a heater: wait for a 3^ème click (or 30 seconds if you didn't hear anything) to let it cool down ;
8. You can then start heating again until your bowl is completely vaporized ;
9. You can then repeat the procedure and heat until you hear a click and so on until your bowl is fully vaporized (dark brown plant and more steam) ;
10. To fill and empty the bowl of your "M" 2022 a simple aspiration and a simple blow are enough.

Be careful not to burn yourself, so remember to let your "M" 2022 cool down before putting your fingers in it.

Video and instructions for the VapCap M Dynavap :

Packs and accessories :

• For more flavors:
  Take advantage of our offer "VapCap M likes", to discover the purity of flavors with a glass body for 14 € extra.
  
  To take advantage of this offer, select the desired tube under the button Buy.

• To properly heat your VapCap :
  A good storm lighter / torch will allow you to heat up more quickly your vaporizer Dynavap.
  Find all our lighters / torches storm flame for portable vaporizers here
  To do without a lighter at home, you can equip yourself with the v2 induction heating Orion available here.

• For storage:
  Sold without transport tube, you can find them here, the Dynavap storage tube allows you to store your VapCap after use.
  To store it with grass next to it there is the Dynastash and the Dynaquad stash.

• For the presentation:
  A cheap stand for vaporizer laptop such as that ofOrion will allow you to place one to two VapCap Dynavap vertically.
  
  Perfect to prevent your vaporizer M 2022 does not roll.

• To filter the steam directly onto a suitable water filter or bong:
  Special offer with the purchase of your vaporizer, get a 9 € discount on the purchase of one of our bubblers or bangs with the mention "Bubble Vape". To do so, you just have to enter the codeBUBBLEVAPE before paying.
  Buy a bubbler for your vaporizer allows you to humidify and cool your steam which is very pleasant for temperatures above 200°C and for throats sensitive to dry steam, even cold.
  
  On the picture, the vaporizer Dynavap is mounted on the bubbler with a fat mouthpiece.