Vaporisateur mécanique à billes

Features

• Materials: borosilicate glass and silicone O-rings ;
• Measurements*: 15.8 cm for ?? g ;
• Adaptable to: female joints ♀ in Ø 10, 14 and 18 mm (bubblers, sherlocks, etc.)

* Measurements provided as an indication. Due to the handcrafted content of the product, these may vary slightly.

When you buy a mechanical bubbler vaporizer, you will receive:

• 1 x body with WPA (Water Pipe Adapter) tip Ø 10, 14 and 18 mm;
• 1 x heating body with balls ;
• 2 x O-rings.

Usage:

1. Equip yourself with a lighter, preferably storm. Place your finely chopped plants in the firebox (located opposite the WPA joint). Assemble the parts together as shown in the product photo.
2. Heat the mouthpiece at the level of the balls for a long time, then :
3. Breathe in slowly and long at the WPA joint, or place the just heated sprayer on the joint of your cooling system (bubbler, sherlock, etc.), then breathe in slowly and long.
4. Repeat! Depending on the quality of your plants, you will be able to perform a greater or lesser number of heatings and therefore breathings. Your session should generally end when your plants become dark brown, when you do not have much steam or when the taste approaches too much combustion. It can be wise to mix the plants with a pick to guarantee a more homogeneous rendering on your HDV (already vaporized herbs).

⚠️ As the glass is not guaranteed, we invite you to shake your package before signing for it and to sign it with reservation in case of doubt. In case of broken glass upon receipt, you have one hour to report it to us, otherwise no request can be accepted.