Maker's Kit DarkWood Vapcap Dynavap

The Dynavap Makers Kit is a kit that allows you to carve the wood that will make the body of your Dynavap VapCap.

The Dynavap maker's kit comes with all the elements you need to have a portable VapCap vaporizer with a wooden body in your hands.

Have you been dreaming of having a unique VapCap?

The Dynavap Maker's kit may be just what you need.

Buying a Dynavap Maker's kit means getting :

• A titanium tip.
• A course.
• A standard condenser with its O rings (the bullfighting joints).
• A block of wood to carve.
• A set of 12 tools to carve the wood block.
• Sandpaper to make your wood all smooth after carving.
• A dynawax to polish the wood.

+ La Centrale Vapeur's welcome kit =

• A mix of 10 grams of plants to spray.
• A carrying pouch adapted to the size of your portable vaporizer.

Of course you don't have to carve the wood and you can use your maker's kit directly to make a raw spray.

The vaporizer you create with the Dynavap Maker's Kit works just like any other dynavap VapCap.

Technical characteristics of the Makers Kit VapCap Dynavap vaporizer:

• Medical silicone and stainless steel
• Very small = 92 mm
• Dark wood to cut yourself
• Lightweight = 19.5 grams
• Heats up in seconds (3 to 5 seconds) with a storm lighter
• Can be heated with any heat source (candle, ember, light bulb etc.)
• Very good aroma rendering
• Temperature more or less variable with knowledge, depending on the location of the flame during heating

Maker's Kit VapCap Vaporizer Instructions:

First of all, we advise you to train with a spray bottle empty of any substance

• Remove the small metal cap.
• Fill the titanium bowl (not the cap) with dry crumbled plants or resin
• Close the cap of your VapCap Vaporizer DynaVap
• Heat the cap on the side of the metal, while turning, until you hear a click

CAUTION: DO NOT HEAT FROM THE END!

But only on the sides of the cape (see video below)

• After the click, turn off the heater and inhale.
• If you continue to heat after the first click, a second click will be heard indicating that it is absolutely necessary to stop the heating because otherwise the combustion will take place and this overheating tends to damage the cape.
• Before you start a new heat run:
• Wait for a 3rd click (or 30 seconds if you didn't hear anything) to let it cool down
• You can then start heating again until your bowl is completely vaporized
• You can then repeat the procedure and heat until you hear a click and so on until your bowl is fully vaporized (dark brown plant and more steam)
• To fill and empty the bowl of your "M" 2019 a simple aspiration and a simple blow are enough

Be careful not to burn yourself, so remember to let your VapCa cool down before putting your fingers in it.

How do I clean the Dynavap VapCap Maker's Kit?

Cleaning this portable vaporizer is quite easy and quick, here is the procedure we recommend

• Disassemble your Dynavap vaporizer completely
• Soak all parts in boiling water for 1 minute EXCEPT wood
• Take them out, wipe them and dip them in a ziplock bag containing 90° alcohol for 2 minutes and shake a little
• Take them out, rinse them with clean water and then dip them in boiling water containing a little cleaner like Limpuro (or other) for 5 minutes
• Rinse with clean water.
• The wood can be maintained with the supplied Dynawax (wood wax).

Voila, your VapCap vaporizer is clean, odorless and ready to follow you wherever you want to take it.

Our opinion after testing and reviewing The "M" 2019 VapCap Vaporizer:

Surprisingly easy to use.

The temperature control by the sound of a click is very ingenious and allows a complete and combustion-free vape experience.

Its components allow a very good rendering of the aromas and a complete and fast extraction of the active principles.

Robust, discreet, fully cleanable, it will quickly become your all-terrain sprayer to take with you everywhere.

The Dynavap Vapcap is a very good portable vaporizer.

A must have for any vape enthusiast and above all a very very good vaporizer.

The team of La Centrale Vapeur would like to inform you that on the Cape, marks are more or less visible. They are machining and welding marks. Some times the Cap presents traces of heating, it is simply the metal which reacts to the heat at the time of the welding or the cutting. These marks or discolorations are quite normal, and do not interfere with the operation of the Cap.

For questions before or after purchasing the new "M" 2019 Vapcap from Dynavap Vaporizerour team of enthusiasts is at your disposal on our Steam Hotline at 01.83.64.69.26 from 10am to 6pm from Monday to Friday.

You can also order directly over the phone if you wish.

If you want to buy a vaporizer in Paris, our store of vaporizer and e-cig, is now 200 meters from the metro Voltaire on line 9, at 74 rue Sedaine 75011 Paris.