The M 2020 Rosium

Take advantage of our offer "VapCap M aime", to discover the purity of the flavours thanks to a glass body for 15 euro more instead of 24,90€, that is to say 9,9€ of reduction.

To take advantage of this offer, select the desired tube under the "Buy" button.

The "M" 2020 Rosium is the latest version of Dynavap's best selling, 100% medical grade stainless steel "M" VapCap Original

Improvements made by The 2020 M VapCap Dynavap:

• New Cap called Captiv Cap.
• Faceted serrated tip (the herb/resin bowl) with a redesigned print.
• Adjust-a-bowl technology that reduces the size of the bowl by 50% for even smaller micro-dosing.
• Chiral air inlets, i.e. asymmetric for high turbulence air injection.
• Mouthpiece with a diameter of 10 mm.

The "M" 2020 Rosium is a small portable vaporizer, non-electric, which works - preferably - with a torch lighter OR any other heat source, like its predecessor and competitor: the Vaponic. The "M" 2020 Rosium is a very good portable vaporizer with its lighter heating and sound temperature control. It is very easy to use and has a great flavour.

The real innovation of Dynavap, present on all the portable vaporizers of the brand Dynavap Vaporizeris a temperature control by sound.

As soon as the vaporization temperature is reached (about 190°C) the cap of the vaporizer emits a small "click" indicating that you must stop the heating immediately. A second, louder click indicates that you really need to stop because the combustion is too close.

As soon as the vaporizer is cold enough for a second heating cycle, a 3^ème click is heard.

Your Dynavap vaporizer is then ready to be heated again until you hear a click indicating that the vaporization temperature has been reached and that the VapCap no longer needs to be heated. And so on.

In addition, a small hole located on the device, just under the mouthpiece allows you to regulate more or less the air flow and therefore the density of your inhalations.

Finally, its size and the way it is used make it a perfect cheap portable vaporizer for resins The "M" 2020 Rosium is therefore a very ingenious and easy to use portable vaporizer.

Available in several materials

The flavors and the density of vapor produced by the VapCap is bluffing, its size and its simplicity of use are simply brilliant. A must have for any self-respecting vaporizer aficionado who needs a portable but qualitative vaporizer.

To buy a The "M" 2020 Rosium portable vaporizer is to receive :

• 1 x The "M" 2020 Rosium portable vaporizer from DynaVap

The welcome kit La Centrale Vapeur =

• A carrying case offered by LCV
• A mix of 10 grams of plants (Damiana or other).

Sold without transport tube, you can find them here, the Dynavap storage tube allows you to store your VapCap after use.

A cheap portable vaporizer stand such as this one from Orion will allow you to place one to two VapCap Dynavap vertically

Perfect to prevent your M 2020 Rosium vaporizer from rolling under the table.

To store it with grass next to it there is the Dynastash and the Dynaquad stash.

Take advantage of our flavour offer to discover the purity of the aromas thanks to a glass body for 15 euro extra instead of 24,90€ 9,9€ discount.
To take advantage of this offer, select the desired tube under the "Buy" button.

N.B.: A good storm lighter / torch will allow you to heat up your Dynavap vaporizer more quickly.

Do you want to buy a torch lighter of your choice?

Find all our lighters / torches storm flame for portable vaporizer here

If you want to filter your steam directly onto a suitable bubbler / bong :

Special offer with the purchase of your vaporizer, get a 9€ discount on the purchase of one of our bubblers or bangs marked "Bubble Vape"

To do this, simply enter the following code before paying BUBBLEVAPE

Buying a bubbler for your vaporizer allows you to humidify and cool your vapor which is very pleasant for temperatures above 200°C as well as for throats sensitive to dry, even cold vapor.

In the picture, the Dynavap vaporizer is mounted on the bubbler with a fat mouthpiece available here.

Another solution to connect your Dynavap vaporizer to a bong with a 14mm joint, directly your mouthpiece surrounded by a moistened paper towel to make the complete joint.

Technical characteristics of The "M" 2020 Rosium vaporizer:

• Medical silicone and stainless steel
• Very small = 92 mm
• Lightweight = 19.5 grams
• Heats up in seconds (3 to 5 seconds) with a storm lighter
• Can be heated with any heat source (candle, ember, light bulb etc.)
• Very good aroma
• Temperature more or less variable with know-how, depending on the location of the flame during heating

The "M" 2020 Rosium Vaporizer Instructions :

First of all, we advise you to train with a vaporizer empty of any substance

• Remove the small metal cap from the "M" 2019
• Fill the stainless steel bowl of the 2019 "M" (not the cap) with dry crumbled plants or resin
• Close the "M" 2019, Vaporizer DynaVap
• Heat the 2019 "M" on the side of the metal cap, while turning, until you hear a click

CAUTION: DO NOT HEAT FROM THE END!

But only on the sides of the cape (see video below)

• After the click, turn off the heater and inhale.
• If you continue to heat after the first click, a second click will be heard indicating that it is absolutely necessary to stop the heating because otherwise combustion will take place and this overheating tends to damage the cap.
• Before we start a new heat run:
• Wait for a third click (or 30 seconds if you didn't hear anything) to let it cool down
• You can then start heating again until your bowl is completely vaporized
• You can then repeat the procedure and heat until you hear a click and so on until your bowl is fully vaporized (dark brown plant and more steam)
• To fill and empty the bowl of your "M" 2019 a simple suction and a simple blow are enough

Be careful though to avoid burning yourself, so remember to let your 2019 "M" cool before putting your fingers in it.

How do I clean the Dynavap "M" 2020 Rosium vaporizer?

Cleaning this portable vaporizer is quite easy and quick, here is the procedure we recommend

• Dismantle your Dynavap vaporizer completely
• Soak all parts in boiling water for 1 minute
• Take them out, wipe them and dip them in a ziplock bag containing 90° alcohol for 2 minutes and shake a little
• Take them out, rinse them with clean water and then dip them in boiling water containing a little cleaner like Limpuro (or other) for 5 minutes
• Rinse with clean water

Voila, your The "M" 2020 Rosium DynaVap vaporizer is brand new, odorless and ready to follow you wherever you want to take it.

Our opinion after testing and reviewing The "M" 2020 VapCap :

The "M" 2020 works just as well as the Original VapCap, the HydraVong or the Omnivap, it is surprisingly easy to use.

The temperature control by the sound of a click is very ingenious and allows a complete and combustion-free vape experience.

Its components allow a very good rendering of the aromas and a complete and fast extraction of the active principles.

Robust, discreet, fully cleanable, it will quickly become your all-terrain vaporizer to take with you everywhere.

The "M" 2020 is, like its predecessors, a very good portable vaporizer.

A must have for any vape enthusiast and especially a very very good vaporizer.

If we compare only the flavor / steam the VapCap is worth a vaporizer 3 times more expensive so if you are looking for a small cheap vapo to start or to tide you over the "M" 2020 is an excellent choice.

Identification:

All Dynavap portable vaporizers have the same heating element that indicates the temperature with a "click": The Cap - stainless steel.

Difference between the The "M" 2017on The "M" 2018 the "M" 2019 Vapcap and the M 2020:

nb: The 2017, 2018 and 2019 M's are no longer manufactured as of 1/03/2020.

The finish on the body and especially an airflow (air passage) more airy on the 2018 "M", so a draw closer to the combustion on the 2017 "M".

The following changes can also be observed on the 2020 "M":

The body of the VapCap has been machined in such a way as to offer resistance during handling, in fact, even with your eyes closed, thanks to the ridges and finishes, you will be able to know on which side you are holding the VapCap "M" 2020. The side of the tip will be the side with the ridges.

The AIR PORT (the air intake of the DyNaVaP) is now surrounded by additional trim, allowing more control. This allows for more control over the air supply.

Deep finishes are located just under the AIR PORT, allowing, a simplified location of the air inlet (just on the other side), an ergonomics and a grip even more pleasant, as well as the handling, we will now be able to vary this air inlet at will!

And finally, the tip. This one has been greatly improved. The air inlet of the tip in propeller mode has been replaced by an inlet that snakes through the tip, thus improving the air inlet and the filling of the chamber.

Difference between the new "M" 2020 Vapcap and Dynavap's HydraVong:

The difference is in the body of the VapCap vaporizer, as it is made of rare wood and interchangeable on the HydraVonG version.

The stainless steel parts of the "M" are made of titanium in the HydraVonG.

The HydraVong can be connected to a bong with a 14 mm female joint, the M 2020 with a 10 mm joint

Difference between the new "M" 2020 Vapcap and the Dynavap Omnivap :

The difference is in the body of the Omnivap vaporizer which is 100% titanium, titanium being lighter, stronger and cooling faster than steel.

Furthermore, the Omnivap has an adjustable air flow/draft where other Dynavap vaporizers like the The 2018 "M" or the VapCap Original are equipped with a simple plugging hole.

☎️ For any questions before or after purchase, our team of enthusiasts is at your disposal on our vape hotline at +33 1 83 64 69 26 from 11 am to 7:30 pm from Monday to Friday, and from 12:30 pm to 7:30 pm on Saturday. You can also place an order directly over the phone if you wish.

If you want to buy a vaporizer in Paris, our vaporizer shop is 500 meters from the République metro station, at 16 boulevard de Magenta, 75010 Paris.