The VapCap M 2018

The 2018 "M" is the 2018 version of the best-selling, 100% medical-grade stainless steel Original VapCap from Dynavap.

The 2018 "M" VapCap is a tiny, portable vaporizer, non-electric, since it works - preferably - with a torch lighter OR any other heat source, like its predecessor and competitor: the Vaponic.

With its lighter heating and temperature control by sound The 2018 "M" is a very good cheap portable vaporizer.

Flavor rendering and ease of use.

Dynavap's real innovation, present on all the brand's portable vaporizers Dynavap Vaporizer, is temperature control by sound temperature control by sound.

As soon as the vaporization temperature is reached (around 190 ℃), the cap - or cap - of the vaporizer emits a little "click" telling you to stop heating immediately.

A second, louder click indicates that you really need to stop, as combustion is too close.

As soon as the vaporizer is cool enough for a second heating cycle, a^3rd click is heard.

Your vaporizer Dynavap is then ready to be heated again, until you hear a click indicating that the vaporization temperature has been reached and the VapCap no longer needs heating. And so on.

In addition, a small hole located on the device, just below the mouthpiece, enables you to regulate the airflow more or less, and thus the density of your inhalations.

Finally, its size and the way it's used make it an inexpensive portable vaporizer perfect for resins.

The 2018 "M" VapCap is an ingenious and easy-to-use portable vaporizer.

The flavors and vapor density produced by the VapCap are amazing, and its size and ease of use are simply brilliant.

A must-have for any self-respecting vaporizer aficionado in need of an add-on but qualitative portable vaporizer.

To buy a vaporizer The 2018 "M" VapCap is to receive:

• 1 x vaporizer The 2018 "M" VapCap from DynaVap
• 1 x DynaVap carrying tube

N.B. A good storm / torch lighter will allow you to heat up your vaporizer Dynavap faster.

Would you like to buy a torch lighter of your choice?

Find all our lighters / torches storm flame for vaporizer portable here

If you'd like to filter your vapor directly onto a suitable bubbler / bong:

Special offer when you buy your vaporizer, get €9 off the purchase of one of our bubblers or bangs marked "Bubble Vape"

Simply enter the following code before paying: BUBBLEVAPE

Buying a bubbler for your vaporizer allows you to humidify and cool your vapor, which is very pleasant for temperatures above 200°C and for throats sensitive to dry vapor, even cold.

In the photo, the vaporizer Dynavap is mounted on the bubbler with a fat mouthpiece available here.

Another solution to connect your vaporizer Dynavap to a bong with a 14mm joint, directly your mouthpiece surrounded by a moistened paper towel to make the complete joint.

Technical specifications of vaporizer The 2018 "M" VapCap:

• Medical silicone and stainless steel
• Very small = 92 mm
• Lightweight = 19.5 grams
• Heats up in seconds (3 to 5 seconds) with a storm lighter
• Can be heated with any heat source (candle, ember, light bulb, etc.)
• Very good aroma
• Temperature more or less variable with skill, depending on the location of the flame during heating

How to use vaporizer The 2018 "M" VapCap:

First of all, we advise you to practice with an empty vaporizer

• Remove the small metal cap from The 2018 "M"
• Fill the stainless steel bowl of The 2018 "M" (not the cap) with dry crumbled plants or resin
• Close the cap of The 2018 "M" Vaporizer DynaVap
• Heat the The 2018 "M" VapCap on the side of the Metal cap, while turning, until you hear a click

CAUTION: DO NOT HEAT FROM THE END! Only heat the sides of the cap (see video below)

• After the click, stop heating and inhale.
• If you continue to heat after the 1st click, a second click will be heard, indicating that you absolutely must stop heating, as otherwise combustion will take place, and this overheating tends to damage the cap.
• Before restarting heating:
• Wait for a 3rd click (or 30 seconds if you didn't hear anything) to let it cool down
• You can then start heating again until your bowl is completely vaporized
• You can then repeat the procedure and heat until you hear a click, and so on until your bowl is fully vaporized (dark brown plants and no more steam)
• To fill and empty the bowl of your The 2018 "M" VapCap, all you need to do is suck it up and blow it out

Be careful not to burn yourself, so remember to let your The 2018 "M" VapCap cool before putting your fingers in it.

How do I clean vaporizer The 2018 "M" by Dynavap?

Cleaning this portable vaporizer is quick and easy, and we recommend the following procedure

• Completely disassemble your vaporizer Dynavap
• Soak all parts in boiling water for 1 minute
• Take them out, wipe them dry and soak them in a ziplock bag containing 90° alcohol for 2 minutes, then shake a little
• Take them out, rinse with clean water, then soak in boiling water containing a little cleaner such as Limpuro (or similar) for 5 min
• Rinse with clean water

Voila, your vaporizer The 2018 "M" DynaVap is brand new, odorless and ready to follow you wherever you want to take it.

Our opinion after testing and reviewing the vaporizer The 2018 "M" VapCap:

The 2018 "M" works just as well as the Original VapCap, Ti Woody or Omnivap, and is surprisingly easy to use. Temperature control by the sound of a click is very ingenious and enables a complete, combustion-free vape experience. Its components deliver excellent flavor rendition and complete, rapid extraction of active ingredients.

The The 2018 "M" is already a very good vaporizer portable. Sturdy, discreet and fully cleanable, it will quickly become your all-terrain vaporizer to take with you wherever you go. A must-have for every vape enthusiast and, above all, a very, very good companion vaporizer.

If you compare only the flavor/vape rendering, the VapCap is more than worth a vaporizer 3 times more expensive, so if you're looking for a small, inexpensive vapo to start with or to tide you over, The 2018 "M" is an excellent choice.

Identification:

All Dynavap brand portable vaporizers feature the same heating element that indicates temperature with a "Click": the The Cap - stainless steel.

Difference between vaporizer The M 2017 and The M 2018:

The finish on the body and, above all, a more airy airflow on the M 2018, so a draft closer to that of the combustion on the M 2017.

Difference between vaporizer The 2018 "M" and Dynavap's Ti Woody :

The difference lies in the body of the vaporizer VapCap, as it is made of rare wood and interchangeable on the Ti Woody version.

The stainless steel parts of The "M" are made of titanium in the Ti Woody (the bowl, for example).

Difference between vaporizer The 2018 "M" and Dynavap's Omnivap:

The difference lies in the body of the vaporizer Omnivap, which is 100% titanium, titanium being lighter, stronger and cooling faster than steel.

What's more, the Omnivap features an adjustable air flow/draft where other vaporizer Dynavap models like the The 2018 "M" or the VapCap Original are equipped with a simple plug hole.

Here's a video presentation of DynaVap's vaporizer The 2018 "M" VapCap :

Made in the company of The Prune, our favorite yoga teacher, more info on the video page.

The La Centrale Vapeur team would like to point out that on the Cap, marks are more or less visible. These are machining and welding marks. Sometimes the Cap shows traces of heating, simply the metal reacting to the heat during welding or cutting. These marks or discolorations are quite normal, and do not interfere with the Cap's operation.