Rubilyzer Pro

An improved version of the Rubilyzer, the Rubilyzer Pro offers the following enhancements:

• The housing (heating element) is now pre-filled with 155 2.5 mm rubies (balls), for faster heat transfer and better retention
• Standard housing grids are replaced by robust grids. Precision CNC-drilled metal plates for enhanced durability and constant airflow
• Now supplied with the Micro Matrix Bowl, a bowl adapted to the size of the Rubilyzer Pro housing, which like the Titanium Hybrid Bowl features a titanium surface, and a 14 or 18 mm male adapter

Features:

• Materials: grade 2 titanium, stainless steel, synthetic rubies, borosilicate glass, Viton and wood
• Recommended temperatures: 270 to 330°C
• Stand with non-slip feet for placing the coil while still hot
• French version of Crossing's Ruby Twist Pro

When you buy a Rubilyzer Pro, you receive :

• 1 x Rubilyzer Pro housing (titanium, pre-filled with ruby)
• 1 x Micro PID controller
• 1 x 20 mm heating coil with silicone handle
• 1 x Micro Matrix Bowl (with 14 and 18 mm adapter)
• 1 x steel stand
• 1 x European power cable (220 V)
• 1 x tamping spoon/tool
• 3 x spare housing screws
• 1 x Allen key
• 1 x wooden cleaning brush
• 1 x pack of 2.5 mm ruby balls
• 2 x CNC stainless steel grids
• 2 x Viton seals
• 1 x stirring tool
• 1 x user manual
• 1 x basket grid

For optimum performance, the Rubilyzer Pro requires a water/air filter with 14 or 18 mm female seal.

Installation and set-up :

1. Unpack the kit, then connect the power cable between the back of the controller and a power outlet.
2. Connect the housing cable to the front of the controller.
3. Place the housing on its stand.
4. Switch on the controller by pressing the central button for 3 seconds.
5. Adjust the temperature to 380°C using the - and +buttons , and let it heat up for 5 minutes (at the very first launch) to get rid of any residues from the design of the Rubilyzer Pro parts.

Using the Rubilyzer Pro :

1. Set the temperature to 290°C and wait for it to stabilize. The suggested temperature is for guidance only, so feel free to do your own tests.
2. Using the spoon provided, place the quantity of crushed flowers (ideally in medium grind) into the Micro Matrix Bowl. Do not tamp down, to let the hot air circulate and ensure even vaporization.
3. Place the Micro Matrix Bowl on the bubbler of your choice.
4. Place the housing on the Micro Matrix Bowl, hold it in place and inhale through the mouthpiece of your bubbler. Repeat until your flowers are sufficiently vaporized. It's a good idea to stir the bowl after 2 or 3 inhalations.
5. Carefully remove the Micro Matrix Bowl, turn it upside down and remove any plant residue with the brush.

Notes

• Do not leave the housing on the Micro Matrix Bowl while it is heating up. Use the stand provided to avoid breakage.
• After the first bowl, adjust the temperature if you wish. We recommend a temperature of between 270 and 330°C. Lower temperatures will better preserve flavors, while higher temperatures allow for stronger extraction.
• It is possible to use higher temperatures, but it is recommended to start below the recommended temperatures to avoid any risk of burning your plants.
• When the controller is switched on, 5 clicks on the central button start the automatic switch-off function, adjustable from 0 to 5 hours. Once the timer duration has been selected, press the central button again to confirm.
• Celsius/Fahrenheit : Hold down the + button for 5 seconds when the PID is off. Then press the + button again to switch from C to F. Press the central button to exit.

Cleaning:

• There's no need to clean the Rubilyzer Pro housing.
• Plant debris can be brushed off the grille. Like the glassware, it can also be immersed in isopropyl alcohol, then rinsed with hot water. Wait for the element to dry before use.

⚠️ Glass is not covered by warranty, so we advise you to shake your package before signing for its reception and to sign with reservation if in doubt. In case of broken glass upon receipt, you have one hour to report it to us, otherwise no request can be accepted.

☎️ For any questions before or after purchase, our team of enthusiasts is at your disposal on our vape hotline at +33 1 83 64 69 26 from 11 am to 7:30 pm from Monday to Friday, and from 12:30 pm to 7:30 pm on Saturday. You can also place an order directly over the phone if you wish.

If you want to buy a vaporizer in Paris, our vaporizer shop is 500 meters from the République metro station, at 16 boulevard de Magenta, 75010 Paris.