Taroma Lite Plus Aromatheraphy Device DIY Kit

Features:

• Materials: titanium, stainless steel, borosilicate glass, stabwood (stabilized walnut wood), jade porcelain
• Convection heating
• Temperature accurate to the degree
• Extensivegemstone chamber, around 95% of rubies located at coil heating level. Free space in the cap provides better performance while allowing concentrates to fall into the coil heating area.

Kit contents :

• 1 x titanium housing
• 1 x Ø 14 mm honeycomb adapter
• 1 x coil Ø 20 mm
• 1 x PID controller with European plug
• 1 x stabwood coil handle
• 1 x jade porcelain stand
• 1 x pack of Ø 17 mm stainless steel grids
• 1 x stainless steel spoon / stirring accessory

This kit does not include a water filter or ruby pearls, which can be purchased here or again here (approx. 310 pearls are required).

Cooling :

If you don't own a water filter, here's a list of bubblers we recommend you pair with the Taroma Lite Plus:

• Phil Trator: super-stable, robust and economical
• Osprey Bubbler - Cannabis Hardware: very sturdy and optimally cooled
• Ella Erbien: good cooling, good flavor rendition and economical
• Honeycomb: very good cooling and economical
• Philomene: good cooling and flavor, economical
• Alan Beaker: beaker-type, good overall performance and economical

User guide:

• Start at 265 ℃ (510 ℉) maximum, then slowly increase or decrease until you reach the temperature that suits you.
• For optimum efficiency, the coil should be stretched to be longer than the gemstone chamber, before being retracted again using the cap to hold it firmly in place.
• Do not use coils incompatible with the Taroma Lite Plus. For reference, our coil pinout diagram is as follows:
  Coil (5-pin XLR male connector) Pin 1 = TC-, Pin 2 = TC+, Pin 3 = GND, Pin 4 = AC-, Pin 5 = AC+

Note: If you leave the heater on for a long time, the base of the Taroma Lite Plus may become slightly hot. However, it is not dangerous to touch it briefly.