Taroma 360 Aromatherapy Device DIY Kit

The Taroma 360 is powered by its 150W coil, fully exploited by the complex structure of the vaporizer and delivering a high-flying extraction experience.

The Taroma 360's housing is combined with a custom glass adapter bowl/stem, with thin walls and a large surface area to perfectly combine the effects of convection and conduction. The depth-adjustable grid works perfectly with both small and large doses. What's more, it's micro-dosing-friendly with a basket grid compatibility/option.

The Taroma 360 holds over 200 3 mm rubies in its Gemstone chamber.

Features:

• Materials: titanium, glass, stainless steel, ruby, stabwood (stabilized walnut wood)
• Temperatures: 190 to 254 ℃ (375 to 490 ℉)
• Heats by convection and conduction

Kit contents:

• 1 x GR2 titanium housing
• 1 x glass adapter for stem/bol (compatible with 14 and 18 mm)
• 1 x glass adapter for basket grid (compatible with 14 and 18 mm)
• 1 x coil Ø 20 mm
• 1 x PID controller with European plug
• 1 x coil handle in StabWood Walnut Black/Green/Blue
• 1 x jade suet porcelain holder
• 2 x packs of ruby pearls Ø 3 mm
• 1 x pack of 10 stainless steel grids
• 1 x 16 mm basket grid
• 1 x stainless steel dosing / stirring tool

Cooling :

If you don't have a water filter, here's a list of bubblers we recommend you combine with the Taroma 360:

• Phil Trator: super-stable, robust and economical
• Osprey Bubbler - Cannabis Hardware: very sturdy and optimally cooled
• Ella Erbien: good cooling, good flavor rendition and economical
• Honeycomb: very good cooling and economical
• Philomene: good cooling and flavor, economical
• Alan Beaker: beaker-type, good overall performance and economical

User guide:

A video is available on the manufacturer's YouTube channel.

Attach the grid to the rod at the desired depth. Then slide the Taroma 360 housing onto the stem.

• Low temperature range: from 190 to 210 ℃ (375 to 410 ℉), preheating recommended for 60 to 90 seconds
• Medium temperature range: 210 to 232 ℃ (410 to 450 ℉), preheating recommended for 30 to 60 seconds
• High temperature range: 232 to 254 ℃ (450 to 490 ℉), preheating recommended for 15 to 30 seconds

Note that you should evacuate residual stem heat with your last inhalation after lifting the case, as this is a common step for conduction-oriented devices. In addition, we strongly recommend using the Taroma 360 with a carbed passthrough or ash-catcher, so you can purge the puff without lifting the housing.

Do not alter or use coils incompatible with the Taroma 360. For reference, the coil pinout is as follows: Coil (5-pin XLR male connector) PIN 1 = TC-, PIN 2 = TC+, PIN 3 = GND, PIN 4 = AC-, PIN 5 = AC+.