WoodScents Aromalog - Torched White Ash

WoodScents Made in Ed's TnT:

First of all, WoodScents AromaLog takes its name from its shape, log being a log. More common in the U.S., they're called log vapes. It's a lightweight, cylinder-shaped vaporizer, which is easy to handle thanks to its small size (around 10 cm high, 5 cm in diameter).

WoodScents Aromalog features:

• Materials: wood, Grade 2 titanium, stainless steel, borosilicate glass, silicon carbide (SiC), leather..
• Wood type: torched white ash - widely used in the construction of baseball bats
• Lifetime warranty (except on controller, see details below)
• Dimensions and weight: approx. 10 x Ø 5 cm, 103 g (without controller and glass tube)

To order a Woodscents is to receive :

• 1 x AromaLog WoodScents in hand-turned wood and titanium
• 1 x titanium tip (with grid and gaskets) VapCap from DynaVap
• 1 x 4" (approx. 10.2 cm) straight glass tube
• 1 x 12V adapter with 12V temperature selector and European power cable (220 V)

The Ed's TNT lifetime guarantee for WoodScents:

The WoodScents comes with a lifetime warranty, which is quite rare on the part of brands. This warranty advertises the quality of the technologies and components used in the vaporizer's design. (The 12V adapter, temperature control unit and extension cable are guaranteed for 90 days).

CoolKids Mod Kit included:

Since 2025, WoodScents has been supplied with the "CoolKids Mod Kit". The kit consists of twenty 2 mm SiC beads installed in the WoodScents heating element and a dome-shaped titanium grid. The addition of this kit to WoodScents Aromalogs places these vaporizers in the "ball vapes" category, on a par with the Rubilyzer or certain Qaroma vaporizers.

Insulated titanium air path:

The WoodScents AromaLog uses medical-grade Grade 2 titanium for its air path (the path taken by the air to be heated, and then, to reach the filling chamber), one of the cleanest and safest materials, considered one of the most advanced in the world of salon vaporizers.

Like most salon vaporizers, the ceramic heating element is clad in stainless steel, with a titanium conduit for optimum heat transfer. The titanium heating element and duct are completely separate from the wooden body, preventing overheating and the risk of burns when handling the vaporizer.

The titanium heating element and WoodScents operation (when inhaling by placing theAromaLog on the titanium tip) mean that a stream of hot air passes through the bowl only when inhaling. Apart from that moment, the plants, flavors and active ingredients are thus preserved from the heat.

Simplified, intuitive and customizable operation:

As we said earlier, the WoodScents AromaLog can be used for a wide range of purposes, yet it's easy to use. It works like an induction heater for your DynaVap, in a softer version!

Once the titanium tip has been installed on a wooden or glass stem, simply fill it, without packing it too tightly, then place the WoodScents heating element on top while inhaling. The hot air inhaled will then heat and vaporize your herbs in the titanium tip.

In this way, the WoodScents AromaLog wooden body (and therefore the heating element) is placed on top of the element containing the Tip.

OR

again, if you want to use it in a portable way, it will be the same use as a normal VapCap DynaVap (with the Tip and a torch lighter).

By moving the Tip onto a 14/18 mm wooden or glass adapter (not supplied), you can use it on a water filter.

Using an AromaCup (not supplied), you can diffuse the benefits of your essential oils in any room in your home. Simply line the bottom of the AromaCup with absorbent cotton, soak it in essential oil, then place the AromaCup on the heating element.

A) Direct suction with glass mouthpiece

Place the titanium tip on the 10.2 cm straight glass tube (supplied), and fill the tip with crushed herb, without packing it too tightly. Place the loaded tip at a slight angle above the heating element. To ensure uniform vaporization, feel free to rotate the glass tube.

B) Direct suction with wooden mouthpiece

Place the titanium tip on a wooden stem with condenser (not supplied), fill the tip with crushed grass, but don't pack it in too tightly. Place the loaded tip at a slight angle above the heating element. Rotate the tip to ensure even vaporization.

C) WoodScents on a 14 mm water filter with wooden mouthpiece

Place the titanium tip on a wooden stem Ed's TNT with condenser and Ø 14 mm mouthpiece (not supplied), fill the Tip with crushed grass, but don't pack it in too tightly. Place the wooden stem on the water filter, then turn the heating element upside down over the Tip. Rotate theAromaLog to ensure even vaporization.

Caution: do not leave the WoodScents upside down without using it, or for long periods.

D) WoodScents on a 14 mm water filter with 14 mm glass adapter

Place the titanium tip on a glass adapter (not supplied), and fill the tip with crushed grass, without packing too tightly. Place the glass adapter on the water filter, then turn the heating element upside down, over the tip. Rotate the AromaLog to ensure even vaporization.

Caution: do not leave the WoodScents upside down without using it, or for long periods.

E) WoodScents on a 14 mm water filter with a 14/18 mm wooden adapter

Place the titanium tip on a 14/18 mm wooden adapter (not supplied), and fill the tip with crushed grass, without packing too tightly. Place the wooden adapter on the water filter, then turn the heating element upside down, over the Tip. Rotate the AromaLog to ensure even vaporization.

Caution: do not leave the WoodScents upside down without using it, or for long periods.

F) WoodScents on an 18 mm water filter with 14/18 mm wooden adapter

Place the Titanium Tip on a 14/18 mm wooden adapter (not supplied), filling the Tip with shredded grass, but not too tightly. Place the wooden adapter on the water filter, then turn the heating element upside down, over the Tip. Rotate the AromaLog to ensure even vaporization.

Caution: do not leave the WoodScents upside down without using it, or for long periods.

⚠️ Glass is not covered by warranty, so we advise you to shake your package before signing for its reception and to sign with reservation if in doubt. In case of broken glass upon receipt, you have one hour to report it to us, otherwise no request can be accepted.

☎️ For any questions before or after purchase, our team of enthusiasts is at your disposal on our vape hotline at +33 1 83 64 69 26 from 11 am to 7:30 pm from Monday to Friday, and from 12:30 pm to 7:30 pm on Saturday. You can also place an order directly over the phone if you wish.

If you want to buy a vaporizer in Paris, our vaporizer shop is 500 meters from the République metro station, at 16 boulevard de Magenta, 75010 Paris.