Mini Enail G9 V2

Features:

• Temperature range: 0 → 649 ℃ (0 → 1200 ℉)
• Voltage: 85 - 260V / 50 - 60 Hz
• Manufacturer's warranty: 1 year

Kit contents:

• 1 x G9 Mini eNail with USB port
• 1 x Kevlar Heat Coil Ø 25 mm
• 1 x heavy duty power cable
• 1 x quartz banger ♂ Ø 14 mm
• 1 x directional quartz carb cap
• 1 x user manual (in English, transcribed below)

Use:

1. If you haven't already done so, get a water filter with a Ø 14mm female ♀ joint. Fill it with a little water.
2. Fit the coil on the banger supplied, making sure it fits properly. If it's too tight, disassemble it and adjust as much as necessary.
3. Plug the G9 PID controller into a power outlet, connect the coil and switch on the PID controller using the green switch on the back of the controller.
4. Set the desired temperature using the up  ˄  and down  ˅  keys (0 → 1200 ℉ or 0 → 649 ℃). Once selected, it should flash about ten times.
5. Drop your concentrate into the banger and start inhaling gently, covering it with the carb cap provided. Enjoy!

⚠️ As the coil and banger can become extremely hot during use, please do not touch them until they have cooled down completely!
Do not leave the unit unattended and keep it out of the reach of children and pets.

⚠️ Glass is not covered by warranty, so we advise you to shake your package before signing for its reception and to sign with reservation if in doubt. In case of broken glass upon receipt, you have one hour to report it to us, otherwise no request can be accepted.

☎️ For any questions before or after purchase, our team of enthusiasts is at your disposal on our vape hotline at +33 1 83 64 69 26 from 11 am to 7:30 pm from Monday to Friday, and from 12:30 pm to 7:30 pm on Saturday. You can also place an order directly over the phone if you wish.

If you want to buy a vaporizer in Paris, our vaporizer shop is 500 meters from the République metro station, at 16 boulevard de Magenta, 75010 Paris.