Cold Steel 100 Mod EHPRO Ambitionz Vaper

We've selected the Cold Steel 100 because it's a very robust, aesthetically pleasing mod, and above all compatible with most of our dry herb and concentrate atomizers - see list below.

Requires 18650 mah battery - not included, available here.

Ambition Vaper EHPRO Cold Steel 100 technical specifications:

• Between electronic security and mechanical design, the Ehpro Cold Steel 100 mod offers a hidden all-rounder.
• Materials: steel, zinc and brass (for connectors).
• Maximum power 120W
• Compatible with three battery types: 21700, 20700 or 18650.
• Compatible with atomizers up to 25mm in diameter
• Compatible with resistors up to 0.05ohm.
• Watt, TC, Curve, Volt and Bypass modes (i.e. mech mods).
• Weight: 175 grams
• Dimensions: 91.5 x 39 x 27.5mm
• Large, spring-loaded 510 pin with extra-long travel for high-performance contact
• Micro-USB socket (5V/1.8A).
• 5x18m OLED display.
• Classic Watt mode with three heating speeds.
• Volt mode for rapid voltage adjustment, ideal for MT setups.
• Full temperature control mode (SS/Ni/Ti/TCR)

The Cold Steel 100 is protected against :

• Short circuit
• Overheating
• Overcurrent
• Low voltage
• Reversal of battery polarity
• Long activation (10s)
• Overcharging

Here are the atomizers that vaporize dry plants well, and which we recommend for use with the Cold Steel 100 box:

Generation 2DC Divine Tribe

Glow RCV 18

Glow RCV 14

Any other atomizer with 510 thread will be compatible with this box.

Please note: direct recharging is an emergency solution. To protect your equipment, always use a dedicated battery charger.

Caution: for your own safety, limit your power to 80W if you're using an 18650 battery, and always choose a battery with a maximum discharge current of at least 35A.