Accueil > Vaporizers > Batteries, cells and chargers > Nitecore SC2 Superb Charger
Nitecore SC2 Superb Charger View larger

By buying this product you can collect up to 58 loyalty points. Your cart will total 58 loyalty points that can be converted into a voucher of 1,74 €.


Nitecore SC2 Superb Charger


34,92 € tax incl.

New product

The Nitecore SC2 super charger is a high end intelligent charger for your batteries.

It analyzes the status and the required charge and adapts it to your battery.

Up to 3 A.

Charges two batteries independently and charges via USB - not all three at the same time.

Intelligent battery charger for all cylindrical batteries Li-ion / IMR / LiFePO4 / Ni-MH / NiCd

More details

Add to wishlist

The Nitecore SC2 Superb Charger allows you to charge all cylindrical Li-ion / IMR / LiFePO4 / Ni-MH / NiCd batteries.

A huge power in terms of charging speed, the Nitecore SC2 is capable of charging up to 3000mA on one slot and 5000mA on 2 slots (3000 + 2000).

It also has a USB port to charge your phone or tablet up to 2100 mA.

Instructions for the Nitecore SC2 Superb Charger:

Insert the battery(ies), the automatic detection will do the rest for you.

If you insert a 3.2V LiFePO4 battery you will have to select the 3.7V mode manually on the charger to avoid damaging the battery.

The same applies to a 3.8V Li-ion battery, you will have to select the 4.3V mode.

To select the Voltage:

to install the battery, simply press the button on top of the battery to enter the manual mode and then hold down the V button to enter the voltage selection. Release the button when you are on the desired voltage.
Press the button above the battery again to exit manual mode and begin charging.

For IMR battery restoration

insert the batteries into the charger where the 8 LEDs will flash to indicate that the charger is not ready to charge. To activate the restoration, press and hold the button above the battery to activate the restoration mode.

Load speed :

Li-ion battery over 1200mAh capacity: Default charging current 2A / Max charging current 3A
Li-ion battery less than 1200mAh capacity: Default charge current 0.5A / Max charge current 1A
Ni-MH AA and AAA battery: default charge current 0.5A / max charge current 2A
Ni-MH battery C, D: Default charging current 1A / Max charging current 2A

To manually select the charging current

press the button above the battery and then hold button C to enter the charging current selection.

When the appropriate current is selected, release the button and simply press the button on top of the battery to begin charging.

Caution for Ni-MH and NiCd batteries: do not charge the battery at more than 0.5 x its capacity, i.e. for a 2000mAh battery do not charge at more than 1000mA.

To charge your phone via the USB port, you must not connect batteries at the same time, otherwise the charger will charge the batteries first.

List of compatible batteries :

Li-Ion / IMR / LiFePO4 : 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650
Ni-MH / NiCd: AA, AAA, AAAA, C, D

Technical specifications of the Nitecore SC2 superb charger

  • Input: AC 110 - 240V 50/60Hz 0.9A 30W or DC 12V 2.5A
  • Output: 4.35V / 4.2V / 3.7V / 1.48V
  • USB: 5V 2.1A
  • Output current : 3A + 2A MAX
  • Dimension: 155mm x 80mm x 44mm
  • Weight: 263g (without batteries and power cord)
  • Can charge 2 batteries simultaneously
  • Automatic detection of battery capacity
  • Manual or automatic selection of battery charging voltage and current
  • IMR battery restoration function
  • Reverse polarity protection
  • Automatically stops charging after 10 hours to prevent the battery from overheating.
  • Designed for optimal heat dissipation
  • CE, RoHS, FCC and CEC standards
  • 1 year warranty