No products
Catalog
Vaporizer accessories There are 1112 products.
- 4,17 € 4,90 € -15%
Pack of 16 empty Flowersticks
Kit of 16 pre-fillable Flowersticks for Omura Series X and Series 1 vaporizers. Containing approximately 0.15 g of dried, crushed flowers, they provide optimal heating and vaporization, are environmentally friendly and require no maintenance on your device. Simple, effective and ultra-discreet! ⚠️ Pre-order only: shipment expected by the end of September....
4,17 € 4,90 € -15%Reduced price! - 12,72 € 15,90 € -20%
BB9 ball aerotube for Tinymight 1 & 2
Ball mouthpiece to refresh the steam from your vaporizer Tinymight or Tinymight 2.
12,72 € 15,90 € -20%Reduced price! - 86,80 €
Tip Titanium 9 Fin SE
After 5 years of collaboration with the American brand, The Simrell Collection has developed this special edition Dynavap titanium tip as their ultimate tip.
86,80 € - 45,90 €
Perforated Captive Cap
Offered by The Simrell Collection, this new captive cap has been laser-perforated to let in more air and improve the flavor of your Dynavap thanks to induced convection.
45,90 € - 42,15 € 49,59 € -15% In Stock
18mm Insulated Glass Injector Bowl by Goo...
Injector bowl based on the Goo Roo model, works with all Cannabis Hardware Injector Diffusers.
42,15 € 49,59 € -15%Reduced price! - 42,16 € 49,60 € -15% In Stock
18mm Injector Style "Elev8" Glass Bowl for...
Official injector style glass bowl for FlowerPot desktop vaporizer from Cannabis Hardware. This accessory features an 18 mm Ø ♂ male joint and a built-in glass screen. Intended for use with Flowerpot Injector vaporizers, it can easily be put to other uses.. ℹ️ Also available with a Ø 14 mm joint
42,16 € 49,60 € -15%Reduced price! - 4,80 € 6,00 € -20% In Stock
Chamber O-rings for Convector
Spare O-rings set for the chamber of your Convector vaporizer by Camouflet. They seal the junction between stem and chamber.
4,80 € 6,00 € -20%Reduced price! - 16,00 € 20,00 € -20% In Stock
Single Bore Ceramic Tube for Convector
The Single Bore Ceramic Tube is a condenser for Convector from Camouflet. This ceramic tube fits into the stem (Ø 8 mm) of the vaporizer to create a clean, open-draft vapor path. For a slightly tighter draft and increased refreshment, you can also opt for the Quad Bore Ceramic Tube.
16,00 € 20,00 € -20%Reduced price! - 7,92 € 9,90 € -20% In Stock
Silicone cover for V.A.P Katalyzer
Silicone carrying and storage case for your vaporizer V.A.P portable Katalyzer. Fitted with a wrist strap, it's ideal for protecting your portable from shocks when you're out vaping!
7,92 € 9,90 € -20%Reduced price! - 20,72 € 25,90 € -20%
XL Rocket Stem Tinymight 2
A mouthpiece with integrated glass grille for your vaporizer Tinymight or Tinymight 2. Its numerous beads ensure highly efficient cooling, even if your device is set to high temperatures. Perfect for resins, or for finishing a bowl in a few puffs while sparing your respiratory tract.
20,72 € 25,90 € -20%Reduced price! - 26,00 € 31,00 €
BB6 Pink Midsection / pink
Dynavap's BB6 is the perfect accessory for connecting your VapCap to a bong or other water filter. With its 10 and 14 mm female joints, it will fit most bubblers. Glass beads in the tube cool the vapor for dry vaping enthusiasts. Supplied without Cap, Stainless Tip or Ti Tip, which are necessary to use your BB6 Dynavap.
26,00 € 31,00 €Reduced price! - 26,00 € 31,00 € In Stock
BB6 Blue Midsection / blue
Dynavap's BB6 is the perfect accessory for connecting your VapCap to a bong or other water filter. With its 10 and 14 mm female joints, it will fit most bubblers. Glass beads in the tube cool the vapor for dry vaping enthusiasts. Supplied without Cap, Stainless Tip or Ti Tip, which are necessary to use your BB6 Dynavap.
26,00 € 31,00 €Reduced price! - 37,14 € In Stock
- 13,90 € In Stock
Super fast charger 65W USB 3.0 and USB-C
65W high-speed charging unit with one USB 3.0 and one USB-C port, supplied with high-quality USB-C cable. Perfect for saving time when charging your vaporizer or other electronic equipment!
13,90 € - 12,39 € In Stock
Small Dab Mat GRAV
Dab mats (or dab pads) are used as mats to prevent spillage of concentrates, for example under your dab rig. They can also cushion the fall of glass parts such as bangers or carb caps. Finally, it can also be used as a soft mouse pad or simply as a decorative piece.
12,39 € - 0,32 € 0,40 € -20% In Stock
Adapter gasket for Mighty / Crafty / CFX tips
Silicone ring for mounting glass, titanium and other aerotubes on the cooling unit of your Mighty / Mighty+, Crafty / Crafty+ and CFX portable vaporizers.
0,32 € 0,40 € -20%Reduced price! - 98,37 € 109,30 € -10% In Stock
Baller Series Heater - Ruby Ball...
Kit to update your Super Surfer vaporizer and greatly improve its thermal performance. Includes a new heater cover, 200 ruby beads and a glass cap. This provides more even vaporization, even more heating power and therefore even more concentrated vapor (the equivalent of 2 to puffs in one).
98,37 € 109,30 € -10%Reduced price! - 6,95 € In Stock
DaVinci IQ2 / IQC mouthpiece
Official zirconium flat mouthpiece for your DaVinci IQ2 and DaVinci IQC portable vaporizers.
6,95 € - 53,60 € 67,00 € -20% In Stock
Titanium tip: Helix
Dynavap presents its latest innovation, the Helix titanium tip. With its refined helix design, the Helix is the lightest Dynavap tip to date (3 grams) and its design limits heat transfer with the stem. Its thicker rims and three convection ports facilitate more even vaporization by limiting hot spots.
53,60 € 67,00 € -20%Reduced price! - 10,90 €
Flavor chamber DaVinci IQ, IQ2 and IQC
The Flavor Chamber is the ceramic part of your DaVinci IQ, DaVinci IQ2 or DaVinci IQC portable vaporizer that allows you to influence the flavor of your vapor. In fact, this tube can be opened to accommodate the aromatic plants of your choice, combining the terpenes of the plants in the vaporizer bowl with the chosen herbs.
10,90 € - 7,19 € 7,99 € -10%
Volcano Hybrid tube (1 meter)
1 metre of official suction tube for your Volcano Hybrid salon vaporizer from Storz & Bickel.
7,19 € 7,99 € -10%Reduced price! - 10,50 € In Stock
10 mm DaVinci IQ / IQ2 / IQC adapter -...
Extended mouthpiece and official Ø 10 mm water pipe adapter (WPA) for DaVinci IQ2 and DaVinci IQC portable vaporizers.
10,50 € - 13,70 €
DaVinci IQ Zirconia ceramic spacers set
Set of two official zirconia spacers to modulate the chamber size and capacity of your DaVinci IQ portable vaporizer.
13,70 € - 19,90 € 29,80 € In Stock
Debowler Vaphit
This compact, lightweight and super-sturdy debowler is made of aluminum alloy by Vaphit. The perfect tool to accompany your aromatherapy sessions and to help quickly empty the bowl of your vaporizer and collect the AVB (already vaped buds).
19,90 € 29,80 €Reduced price! - 15,00 € In Stock
Embout buccal saillant PAX
15,00 € - 12,90 € In Stock
PAX flat mouthpiece
Two official flat mouthpieces for vaporizer portable PAX 2, PAX 3, PAX Plus and PAX Mini. Not compatible with PAX 1.
12,90 € - 15,21 € 16,90 € -10% In Stock
Cylinder with insert for Volcano Hybrid...
This ceramic-coated accessory can replace the original one in case of loss, or to upgrade your Volcano Hybrid chamber if you still have the aluminum one.
15,21 € 16,90 € -10%Reduced price! - 8,90 € In Stock
Glass Stirring Tool Arizer
A glass tip ideal for mixing your plants during a session or for easily emptying the chamber of your vaporizer.
8,90 € - 15,30 € 18,00 € -15% In Stock
FlowerPot Debowler Spike
This official Cannabis Hardware accessory makes it easy to empty the bowl of your FlowerPot desktop vaporizer. Compatible with the FlowerPot 5" Heat Stand and can also be used to design your own homemade stand.
15,30 € 18,00 € -15%Reduced price! - 99,00 € 119,00 € In Stock
Heat & Go II
Katalyzer here's an update on the already top-quality induction heater for Dynavap Heat & Go.
99,00 € 119,00 €Reduced price! - 187,68 € 220,80 € -15% In Stock
Auber Enail Controller with 20mm XLR Coil
Auber controller and 20mm XLR coil for Flowerpot enail. Supplied with 220V power plug. The right choice for those who regularly vary the temperature of their controller.
187,68 € 220,80 € -15%Reduced price! - 100,13 € 117,80 € -15% In Stock
Flowerpot F22 Head Assembly
This new FlowerPot head features improved heat dissipation thanks to the addition of a titanium cover and a grid at the bottom of the head, allowing better conduction and retention of heat throughout the unit.
100,13 € 117,80 € -15%Reduced price!
