No products
Catalog
The tectonic stem Aftershock collection from BB Vapes BRVND is a high end stem for Dynavap VapCap systems. It allows for a tighter or super open vape for an ultra fresh vapor. Requires a Dynavap Cap and a Dynavap Tip to operate. All components are compatible with the Shell Shock stems of the same brand.
Adapter to connect your XMAX Starry V3 portable vaporizer to a bong / water pipe / or hydratube. Made of zircon ceramic, this WPA (water pipe adapter) connects to a bong equipped with a 14 or 18 mm female joint.
The Dynavap aluminum debowler stand with magnet is a bowl bouncer, a useful accessory for fans of the Dynavap Vapcap vaporizer.
A powerful and safe battery. The Sony VTC5A in 18650 with 2600 mAh capacity and 30A discharge rate.
The latest generation of rechargeable Lithium Manganese (LiMN) batteries. These batteries can be used safely in high amperage or in series.They can be recharged with a Li-Ion battery charger.
18mm to 14mm male to male adapter for water pipe and vaporizer Adapter for water pipe and filter, to transform your 18mm female joint into a 14mm male joint. Glass element to connect your vaporizer to a pipe / water filter (bong) Fits on all standard bongs
Contains one mouthpiece grid, 2 bowl grids and 2 mouthpiece seals for Starry V3 and V2.
This mouthpiece / stem allows a double combo : make a fresher vapor and bring out the flavors use two tips at the same time! Ideal if you're looking for a thrill.
This adapter / mouthpiece / stem allows a double combo : make a fresher vapor and bring out the flavors use three tips at once! Ideal if you're looking for a thrill.
Adapter 14 to 18 mm male to female, for water pipe and vaporizer Adaptor for water pipe and filter, to transform your Ø 14 mm ♀ female joint into a Ø 18 mm ♀ female joint. Glass element to connect your vaporizer to a pipe / water filter (bong) Fits all standard bongs.
Contains 3 mouthpiece grids and 3 vapor passage grids for Air Vape Legacy.
A mouthpiece for your AirVape Legacy portable vaporizer Same as the original.
A Kanthal A1 resistor called Mix Kanthal for GLOW RCV 18 and 14 clearomizers. Sold individually.
MJ Arsenal's Mini Jig Mini Rig is a really small bubbler perfect for dabbing and offering maximum refreshment with minimum water, thus preserving the terpenes of your extractions and plants to optimum effect. With storage for concentrates built into the glass, it also comes with everything you need to vaporize your extractions: a quartz banger, a flat...
A 24K gold bowl for micro dosing with the Legacy vaporizer.Sold individually.
This complete pack will add a Dynavap in precious wood. Including everything needed to use the vaporizer directly for several days. 1 x Stem Ed's TNT SURPRISE (bloodwood, ash or coconut) 1 x Condenser XL 1 x Tip Stainless Steel 2019 1 x Cap 1 x Multistand 1 x Pocket Prince (random color) 1 x Butane gas 194,90€ instead of 245
The Voopoo Drag X Plus Kit with the GLow RCV 18 V3 is perfect if you're looking for a 100% convection vaporizer with on-demand puffing. Requires a bit of learning - recommended for advanced or knowledgeable vapers.
Includes titanium Flower Pot grid for VRod and Weedeater or for B-Zero, B1, B2 and Injector Diffusor
A replacement head for your FlowerPot Weedeater or to convert your Vrod flowerPot into a Weedeater.
The "De Verdamper" is a living room vaporizer, invented by "Evert Verdamp" in 1995 following experiments with a heat gun and a bong. De Verdamper is a top-of-the-range stationary vaporizer, combining a vaporizer and a water filter for a gentle aromatherapy experience full of aromas. Photo non contractual
The Shell-Shock stem for Dynavap is a small revolution in the Dynaverse. It offers the particularity of an adjustable air flow, a devissable condenser, it is without any seal and is very easy to clean. Only 1250 copies were produced - a victim of its own success.
Vortex in blackwood and its Intercooler from Simrell Collection for Dynavap VapCap systems A thick and ultra fresh vape guaranteed! Sold without TIP or CAP Dynavap. Be careful if you choose the Blackwood Vortex and the intercooler only you will not be able to use it unless you are already equipped with a tip and a Dynavap cap.
For plants and resins the FlowerPot B1 Injector Essentials Bundle is THE vaporizer manufactured by Cannabis Hardware (ex NewVape) dedicated to a strong bang type extraction. Supplied with a 220V European plug.
The Dobby V2 is a small 100% convection wooden vaporizer that consists of two magnetized parts. It works with a storm lighter (included). Its fine airflow allows for large puffs.
Similar to the VapCap M in its operation, the Silencio is a mechanical portable vaporizer: a manual heat source, preferably a storm lighter, is used to raise the temperature in the filling chamber. However, any heat source can be used if necessary!
Recycler type Klein which will delight the amateurs of bangs with its 20 cm height.
Compatible with the vaporizer Crafty and Mighty by Störz&Bickel, this piece has to be placed instead of the mouthpiece and its bowl. Allows you to connect your vaporizer Crafty and Mighty directly on a bong / water pipe. Diameter of the joint: 14 or 18mm.
The 2020 "M" in its Azurium version is the current version of the 2019, 2018 and 2017 VapCap with still a medical grade stainless steel body AND a new finish. Take advantage of our offer to discover the purity of flavors with a glass body for 15 euro extra or 9,9€ discount. To take advantage of this offer, see under the "Buy" button.
The 2020 "M" in its Rosium version is the current version of the 2019, 2018 and 2017 VapCap with still a medical grade stainless steel body AND a new finish. Take advantage of our offer to discover the purity of flavors with a glass body for 15 euro extra or 9,9€ discount. To take advantage of this offer, see under the "Buy" button