Vapman Heating Station

Features:

• Material: olive wood, stainless steel, aluminum and glass
• Compatibility: all Vapman vaporizers
• Warm-up time: 3-5 seconds
• Temperature range: 160 to 230 ℃ (17 heating levels)
• Heat indicator light
• Handcrafted in Italy
• Color: green
• Measurements: 12 x 6 cm for 400 g

To buy a Vapman Heating Station is to receive:

• 1 x Vapman Heating Station
• 1 x charger unit
• 1 x user manual (in English, transcribed by us below)

Instructions for use :

Legend for indicator light :

● Unit is heating up
● Ready for Vapman
● Start inhaling
● Too early

Operating the Vapman Heating Station:

1. Place the Vapman Heating Station on a flat, dry surface.
2. Plug in the unit and flip the switch to the ON position.
3. When the unit is heating up, the indicator light turns red ●. After about 1 minute, the indicator turns yellow ●, indicating that it is ready to receive your Vapman vaporizer.
4. Use the rotary knob to select the desired temperature from 1 (160 ℃) to 9 (230 ℃).
5. Grab your Vapman by the mouthpiece or center section and gently place it on the heating section. Rotate it slightly to hold it in place. The yellow ● indicator will start flashing to indicate that heating is in progress. Once it turns green ●, you can start inhaling.
6. If the steam seems too hot, adjust the temperature accordingly. On the other hand, if the steam is too cool, keep the current setting; the optimum temperature is reached after a few heating cycles.

Notes:

• Only place the Vapman on its station when the indicator is yellow ●. When the light is red ●, remove the Vapman and wait until the indicator switches back to yellow ●. If you place the Vapman when the indicator is red, the indicator will switch to white ○. Finally, remember to remove the Vapman from the heater when the indicator is green ● to avoid overheating.
• To save energy and ensure safety, the station switches off automatically if not used for more than 5 minutes.

Care and cleaning :

• The Vapman Heating Station requires minimal maintenance and generally cleans itself. If particles accumulate on the heating element, try to remove them by gently blowing on them. If this doesn't help, switch off the unit, wait for it to cool down and use a soft tool (such as a pipe cleaner or cotton bud) to extract the unwanted particles.
• Make sure the station stays dry at all times, and avoid exposure to liquids which could damage the electronics.
• Regularly clean the outside of the unit with a slightly damp cloth.
• Store the unit in a dry place to ensure its longevity.