Glow resistance Mix Twisted Kanthal A1

This Kanthal A1 resistor is the same as the one pre-mounted on your GLOW RCV 18 and GLOW RCV 14 clearomizers.

Resistance in the so-called Mix-twisted assembly.

How to change the resistance of the GLOW 18 and 14:

To do this, be sure to turn off your mod.
Remove the wooden base carefully.
Unscrew the screws, remove the resistor and put a new one, making sure to align it well.
Be careful, the wires must touch only the + and - poles, nothing else !
Turn on your mod, launch a heating between 30 to 40 watts to see if your resistor shines well in a uniform red way.
If it's not the case, you have to align the resistor better and check the connections well.
Once this is done, put the wooden base back on and you are ready to go.
If you use another resistor than the one provided, be sure to turn up the wattage very slowly to find the right setting and avoid burning your plants.

☎️ For any questions before or after purchase, our team of enthusiasts is at your disposal on our vape hotline at +33 1 83 64 69 26 from 11 am to 7:30 pm from Monday to Friday, and from 12:30 pm to 7:30 pm on Saturday. You can also place an order directly over the phone if you wish.

If you want to buy a vaporizer in Paris, our vaporizer shop is 500 meters from the République metro station, at 16 boulevard de Magenta, 75010 Paris.