By buying this product you can collect up to 48 loyalty points. Your cart will total 48 loyalty points that can be converted into a voucher of 1,44 €.
29,17 € tax incl.
Suction hose and glass with small bowl for your The Original electric vaporizer from VaporBrothers.
Warning: Last items in stock!
The OG Standard mini hose works by holding the wand against the heating element during aspiration. You can remove the wand between draws to keep it fresher and check your herbs easily between draws.
Thanks to the wand's bell-shaped tip, you can redirect the airflow by simply tilting your hand, allowing better control and browning of your blend.
For the brave and conscientious user only!
Pour boiling water into a small saucepan. Leave the wand fully assembled. Dip the bowl end of the wand into the boiling water and suck the water into the wand, inhaling slowly through the tube. Do not scald yourself with the hot water. Residues should come off when you vigorously blow the water out of the wand. Vaporization residues should not stick to the glass as much as smoke residues. If there are burn marks, try scraping them off with a tool. The pan may become difficult to clean with washing-up liquid, so try this trick: heat some cooking oil, leave for a few minutes, then wash as normal with dishwashing detergent.
Fill a plastic bag about a quarter full with rubbing alcohol (isopropyl alcohol and a little water) and a spoonful of salt. Leave the grid in the wand handpiece. Remove the glass parts and place them in the bag. Shake the bag to cover the glass with alcohol and let it stand for a few minutes. Rinse with hot water. If necessary, repeat the process once or twice, or leave overnight. Rinsing should remove all residues, but will leave a film of oil on the outside of the glass. Use an alcohol-soaked cloth to clean the outside of the glass.
For best performance, use only Vaporbrothers 0.750" (19mm) replacement grids.
At Vaporbrothers, glass is made from laboratory-grade borosilicate glass and meets high standards for materials and workmanship. All units are manufactured to a uniform thickness, and we inspect them under polarized light to ensure there are no imperfections or microfractures.
Ceramic is an extremely dense alternative to glass, and about 5 times stronger. Choose the ceramic option if you're in a place where glass can easily shatter (do you have a glass table or a concrete floor?).
We decided to use this 16 mm size because it's simply better, both in terms of superior vaping experience and because it's more efficient in consuming herbs. Since then, counterfeits and Whip-based competitors have taken a shortcut and used a standard size (19 mm) which is easier to break, consumes more herb and is more likely to spill.
If your current wand VaporBrothers currently bears a red "HOT" or "CAUTION" emblem and attaches to the heating element via a ground glass tip, your vaporizer is a "Hands-Free" model.