No products
By buying this product you can collect up to 106 loyalty points. Your cart will total 106 loyalty points that can be converted into a voucher of 3,18 €.
VABR_8788
63,90 € tax incl.
New product
tax incl.
Easy-to-remove hose and suction ceramic for your The Original electric vaporizer from VaporBrothers.
The ceramic EZ change hose works by holding the wand against the heating element during the draw. You can remove the wand between draws to keep it fresher and check your herbs easily between draws.
Thanks to the wand's bell-shaped tip, you can redirect the airflow by simply tilting your hand, allowing better control and browning of your blend.
At Vaporbrothers, glass is made from laboratory-grade borosilicate glass and meets high standards of materials and workmanship. All units are manufactured to a uniform thickness, and we inspect them under polarized light to ensure there are no imperfections or microfractures.
Ceramic is an extremely dense alternative to glass, and about 5 times stronger. Choose the ceramic option if you're in a place where glass can easily shatter (do you have a glass table or concrete floor?).
For the brave and conscientious user only!
Pour boiling water into a small saucepan. Leave the wand fully assembled. Dip the bowl end of the wand into the boiling water and suck the water into the wand, inhaling slowly through the tube. Do not scald yourself with the hot water. Residues should come off when you vigorously blow the water out of the wand. Vaporization residues should not stick to the glass as much as smoke residues. If there are burn marks, try scraping them off with a tool. The pan may become difficult to clean with washing-up liquid, so try this trick: heat some cooking oil, leave for a few minutes, then wash as normal with dishwashing detergent.
Fill a plastic bag about a quarter full with rubbing alcohol (isopropyl alcohol and a little water) and a spoonful of salt. Leave the grid in the wand handpiece. Remove the glass parts and place them in the bag. Shake the bag to cover the glass with alcohol and let it stand for a few minutes. Rinse with hot water. If necessary, repeat the process once or twice, or leave overnight. Rinsing should remove all residues, but will leave a film of oil on the outside of the glass. Use an alcohol-soaked cloth to clean the outside of the glass.
For best performance, use only Vaporbrothers 0.750" (19mm) replacement grids.
We decided to use this 16mm size because it's simply better, both in terms of superior vaping experience and because it's more efficient in herbal consumption. Since then, counterfeits and Whip-based competitors have taken a shortcut and used a standard size (19 mm) which is easier to break, consumes more herb and is more likely to spill.
⚠️ Glass is not covered by warranty, so we advise you to shake your package before signing for its reception and to sign with reservation if in doubt. In case of broken glass upon receipt, you have one hour to report it to us, otherwise no request can be accepted.
☎️ For any questions before or after purchase, our team of enthusiasts is at your disposal on our vape hotline at +33 1 83 64 69 26 from 11 am to 7:30 pm from Monday to Friday, and from 12:30 pm to 7:30 pm on Saturday. You can also place an order directly over the phone if you wish.
If you want to buy a vaporizer in Paris, our vaporizer shop is 500 meters from the République metro station, at 16 boulevard de Magenta, 75010 Paris.
Anonymous customer published the 02/04/2020 following an order made on 25/03/2020
La base de mon kit en verre s'était cassée après deux ans de bons et loyaux services, j'ai commandé la version en céramique, mais je recommande de placer l'embout en verre sur la partie supérieure car la céramique maintient trop la chaleur et mon produit se sèche un peu plus vite qu'avec l'embout en verre; en revanche la partie inférieure semble plus fiable car plus solide: je conseille donc la version hybride: base en céramique et partie supérieure en verre
Anonymous customer published the 07/02/2020 following an order made on 27/01/2020
Vapor brothers..... Le top...
Anonymous customer published the 25/05/2018 following an order made on 07/05/2018
En cas d'utilisation sur une table en verre, mieux vaut jouer la sécurité avec un kit céramique, 4x plus solide que le verre d'après VaporBrother. L'embout buccal est très agréable et s'emboite bien sur un joint 18,8mm en verre rodé, pratique.