No products
Prices are tax included
View larger By buying this product you can collect up to 133 loyalty points. Your cart will total 133 loyalty points that can be converted into a voucher of 3,99 €.
Maker's Kit DarkWood Vapcap Dynavap
makerskitDW
The Dynavap Maker's Kit is a kit that allows you to make your own Dynavap vaporizer and make it unique as you will be carving the wood that makes the body of your VapCap vaporizer.
It comes with everything you need to create an inimitable VapCap vaporizer.
Availability:Product on restock, expect a 5 to 10-day delay. Add it to your wishlist to be notified when it returns.
The Dynavap Makers Kit is a kit that allows you to carve the wood that will make the body of your Dynavap VapCap yourself.
The Dynavap maker's kit comes with all the elements you need to have in your hands a portable VapCap vaporizer with a wooden body.
Have you been dreaming of having a one-of-a-kind VapCap?
The Dynavap Maker's kit may be just what you need.
Buying a Dynavap Maker's kit means getting :
- A titanium tip.
- A cap.
- A standard condenser with its O rings (the tauric joints).
- A block of wood to carve.
- A set of 12 tools to cut the wood block.
- Sandpaper to make your wood smooth after carving.
- A dynawax to polish the wood.
+ The welcome kit of La Centrale Vapeur =
- A 10 grams mix of plants to vaporize.
- A carrying pouch adapted to the size of your portable vaporizer.
Of course you don't have to cut the wood and you can use your maker's kit directly to make a vaporizer out of it.
The vaporizer you create with the Dynavap Maker's Kit works just like any other dynavap VapCap.
Technical specifications of the Maker's Kit VapCap Dynavap vaporizer:
- Medical silicone and stainless steel
- Very small = 92 mm
- Dark wood to cut yourself
- Lightweight = 19.5 grams
- Heats up in seconds (3 to 5 seconds) with a storm lighter
- Can be heated with any heat source (candle, ember, bulb etc.)
- Very good aroma
- Temperature more or less variable with knowledge, according to the location of the flame during the heating
Instructions for using the Maker's Kit VapCap vaporizer :
First of all we advise you to train with an empty vaporizer
- Remove the small metal cap.
- Fill the titanium tip bowl (not the cap) with dry crumbled plants or resin
- Close the cap of your DynaVap Vaporizer
- Heat the cap on the metal side, while turning, until you hear a click
ATTENTION : DO NOT HEAT FROM THE END !
But only on the sides of the cap (see video below)
- After the click, stop the heating and inhale.
- If you continue to heat after the first click, a second click will be heard indicating that it is absolutely necessary to stop the heating because otherwise the combustion will take place and this overheating tends to damage the cape.
- Before restarting the heating:
- Wait for a 3rd click (or 30 seconds if you did not hear anything) to let it cool down
- You can then start heating again until your bowl is completely vaporized
- You can then start the procedure again and heat until you hear a click and so on until your bowl is fully vaporized (dark brown plant and no more steam)
- To fill and empty the bowl of your "M" 2019 a simple aspiration and a simple blow are enough
Be careful not to burn yourself, so remember to let your VapCa cool down before putting your fingers in it.
How to clean the VapCap Maker's Kit Dynavap vaporizer?
Cleaning this portable vaporizer is quite easy and quick, here is the procedure we recommend
- Disassemble your Dynavap vaporizer completely
- Soak all parts in boiling water for 1 minute EXCEPT the wood
- Take them out, wipe them and soak them in a ziplock bag containing 90° alcohol for 2 minutes and shake them a little
- Take them out, rinse them with clean water and then soak them in boiling water containing a little cleaner such as Limpuro (or other) for 5 minutes
- Rinse with clean water.
- The wood can be maintained with the Dynawax provided (wood wax).
Voila, your VapCap vaporizerer is clean, odorless and ready to follow you wherever you want to take it.
Our opinion after testing and reviewing The "M" 2019 VapCap vaporizer:
Surprisingly easy to use.
The control of the temperature by the sound of a click is very ingenious and allows a complete vape experience without combustion.
Its components allow a very good rendering of flavors and a complete and fast extraction of active ingredients.
Robust, discreet, fully cleanable, it will quickly become your all-terrain vaporizer to bring everywhere with you.
The Vapcap Dynavap is a very good portable vaporizer.
A must have for any vape enthusiast and especially a very very good vaporizer.
The team of La Centrale Vapeur would like to point out that on the Cap, marks are more or less visible. These are machining and welding marks. Some times the Cap presents traces of heating, it is simply the metal which reacts to the heat at the time of the welding or the cutting. These marks or discolorations are completely normal, and do not interfere with the operation of the Cap.
For any questions before or after purchasing the new "M" 2019 Vapcap from Dynavap Vaporizer, our team of enthusiasts is at your disposal on our Steam Hotline at 01.83.64.69.26 from 10am to 6pm Monday to Friday.
You can also order directly by phone if you wish.
If you want to buy a vaporizer in Paris, our store of vaporizer and e-cig, is now 200 meters from the metro Voltaire on line 9, at 6 boulevard Magenta 75010 Paris.
☎️ For any questions before or after purchase, our team of enthusiasts is at your disposal on our vape hotline at +33 1 83 64 69 26 from 11 am to 7:30 pm from Monday to Friday, and from 12:30 pm to 7:30 pm on Saturday. You can also place an order directly over the phone if you wish.
If you want to buy a vaporizer in Paris, our vaporizer shop is 500 meters from the République metro station, at 16 boulevard de Magenta, 75010 Paris.