Gvape - Anlerr

Features :

• Materials: aluminum, ceramic and glass
• Heating type: conduction
• Temperature range: 148 to 224 ℃ to the nearest degree (300 to 435 ℉)
• Glass mouthpiece
• Battery: 2200 mAh
• Recharge: micro-USB (on back of device), in approx. 1h30 to 2h30
• Automatic switch-off after 5 minutes
• Color: black
• Dimensions and weight: approx. 10.1 x 4.5 x 2.2 cm, 99 g

When you buy a Gvape, you get :

• 1 x Gvape vaporizer
• 1 x spare mouthpiece
• 2 x mouthpiece grids
• 2 x O-rings
• 1 x USB / micro-USB charging cable
• 1 x mini dabber / stirring tool
• 1 x cleaning brush
• 1 x user manual (in English, transcribed by us below)

Gvape operation:

We recommend a short cleaning and a full charge before use.

Please use a recommended charger (5V 1000 Ma).

1. Slide the bottom flap to the side to reveal the chamber and place your pre-ground herbs inside. Press lightly, but not too hard. Close the cover and turn the machine upside down.
2. Switch on by pressing the power button 5 times in less than 3 seconds, followed by a vibration. Heating starts automatically on the last settings, which you can change using the ➕ and ➖ buttons.
3. Once the temperature has been reached, the Gvape will again emit a vibration to signal that you can start inhaling.
4. The device switches off automatically after 5 minutes. If your plants still allow it, you can restart the heating process.
5. You can switch the device off at any time by pressing the power button 5 times quickly.

☎️ For any questions before or after purchase, our team of enthusiasts is at your disposal on our vape hotline at +33 1 83 64 69 26 from 11 am to 7:30 pm from Monday to Friday, and from 12:30 pm to 7:30 pm on Saturday. You can also place an order directly over the phone if you wish.

If you want to buy a vaporizer in Paris, our vaporizer shop is 500 meters from the République metro station, at 16 boulevard de Magenta, 75010 Paris.