KIT WPA Vaphit 14 mm

Features:

• Materials: borosilicate glass, 316 stainless steel, food-grade silicone & bamboo
• Tip with male seal ♀ Ø 14 mm

To buy a kit Vaphit 14mm is to receive:

• 1 x WPA glass Ø 14 mm
• 1 x 316 stainless steel bowl
• 1 x carrying case Vaphit
• 1 x stirring tool / dabber
• 1 x bamboo tweezers
• 1 x quartz cap with 1.5 mm holes
• 1 x pack of 5 304 stainless steel grids
• 1 x bag of 10 grids 6.5 x 1.2 mm
• 1 x bag of 10 grids 7.0 x 1.2 mm
• 1 x bag of 10 grids 7.5 x 1.2 mm
• 1 x bag of 10 grids 9.5 x 1.2 mm

Instructions for use :

Load the chamber, slide on the cap, heat the cap slowly for about 5-6 seconds (depending on the wattage you set on your lighter), start vaporizing. If you still don't get any vapor, continue heating for a few more seconds, then try again until you get vapor.

After one cycle, use bamboo tweezers to remove the hot quartz cap. Do not touch the cap directly with your hands until it has cooled down.

⚠️ Glass is not covered by warranty, so we advise you to shake your package before signing for its reception and to sign with reservation if in doubt. In case of broken glass upon receipt, you have one hour to report it to us, otherwise no request can be accepted.

☎️ For any questions before or after purchase, our team of enthusiasts is at your disposal on our vape hotline at +33 1 83 64 69 26 from 11 am to 7:30 pm from Monday to Friday, and from 12:30 pm to 7:30 pm on Saturday. You can also place an order directly over the phone if you wish.

If you want to buy a vaporizer in Paris, our vaporizer shop is 500 meters from the République metro station, at 16 boulevard de Magenta, 75010 Paris.