PipeVape

Features:

• Ceramic chamber capacity approx. 0.5 g
• Adjustable temperature from 149 to 224 ℃ (300 to 435 ℉)
• Session duration: 3-9 minutes renewable
• 0.96" OLED display
• Ergonomic mouthpiece with magnetic attachment
• Two mouthpiece positions (up or down)
• Battery: 3.7 V (Li-Poly), 1100 mAh, 20-25 W
• Charging time: 1h - 1h30
• Recharging: micro-USB
• Colors: black or woodgrain (subject to availability)
• Dimensions: 12.3 x 5.5 x 2.3 cm, 86 g

When you buy a PipeVape, you get :

• 1 x PipeVape vaporizer
• 1 x spare mouthpiece
• 1 x spare mouthpiece magnet
• 1 x micro-USB cable
• 1 x cleaning brush
• 1 x stirring tool
• 2 x replacement grids
• 4 x spare O-rings
• 1 x user manual (transcript below)

Instructions for use:

1. Remove the mouthpiece, and place your herbs (or resins with hemp fiber) into the ceramic chamber, without packing too tightly. You can also use a compatible dosing capsule. Replace the mouthpiece.
2. Press the power button 5 times quickly to switch on the unit. Heating starts automatically (at the last temperature used).
3. Adjust the temperature using the ➕ and ➖ buttons. The display should then show a flashing pipe until the desired temperature is reached.
4. Instead, inhale slowly and for a long time. After 5 minutes of use, the device switches off automatically. To set this delay (between 3 and 9 minutes), press the power button 3 times quickly, and adjust with the ➕ and ➖ buttons.

Setting the temperature unit:

Press and hold the power button for 3 seconds to switch between degrees Celsius and Fahrenheit.

☎️ For any questions before or after purchase, our team of enthusiasts is at your disposal on our vape hotline at +33 1 83 64 69 26 from 11 am to 7:30 pm from Monday to Friday, and from 12:30 pm to 7:30 pm on Saturday. You can also place an order directly over the phone if you wish.

If you want to buy a vaporizer in Paris, our vaporizer shop is 500 meters from the République metro station, at 16 boulevard de Magenta, 75010 Paris.