The VonG Starter Pack

The 2021 VonG is the latest version of Dynavap's high-end "M" VapCap Original, made of wood and medical-grade titanium, which fits onto a water filter.

New improvements brought by Dynavap's The 2021 VonG:

• New Cap called "Captiv Cap"
• Faceted serrated tip (the herb/resin bowl) with a redesigned draw-off
• Adjust-a-bowl technology reduces bowl size by 50% for microdosing
• Rotationally adjustable air inlet
• Mouthpiece adaptable to any water filter fitted with a Ø 10 or 14 mm ♀ female joint
• Wooden part encircled in two faceted titanium rings

The La Centrale Vapeur team would like to point out that on the Cap, marks are more or less visible. These are machining and welding marks. Some Capes show traces of heating; this is simply the metal reacting to the heat during welding or cutting. These marks or discolorations are completely normal, and do not interfere with the Cap's operation.

Dynavap's real innovation, present on all the brand's portable vaporizers Dynavap Vaporizer, is temperature control by sound temperature control by sound.

As soon as the vaporization temperature is reached (approx. 190 ℃), the cap (or the Cap) of the vaporizer emits a small "click" telling you to stop heating immediately. A second, louder click indicates that you really need to stop, as combustion is too close.

After a few seconds, as soon as the vaporizer is cool enough for the next heating cycle, a 3^rd click is heard.

Your vaporizer Dynavap is then ready to be heated again, until you hear a click indicating that the vaporization temperature has been reached and the VapCap no longer needs heating. And so on.

In addition, a small hole located on the device, just below the mouthpiece, enables you to regulate the airflow more or less, and thus the density of your inhalations.

Finally, the way it works, vaporizer is perfect for resins.

The flavor and density of the vapor produced by the VapCap is amazing, and its size and ease of use are simply brilliant. A must-have for any self-respecting vaporizer aficionado in need of a portable vaporizer.

Buying The VonG Starter Pack means receiving:

• 1 x vaporizer portable The 2021 VonG
• 1 x DynaStash Wenge
• 1 x Storm Lighter (gas empty)
• 5 x High Temp O-rings
• 3 x Condenser O-rings
• 1 x Titanium CCD

Technical specifications of The 2021 VonG:

• Materials: wood, titanium, stainless steel and medical silicone
• Very small (92 mm) and light (15.7 grams)
• Heats up in seconds (3 to 5 seconds) with a storm lighter
• Can be heated with any heat source (candle, ember, light bulb, etc.)
• Very good aroma
• More or less variable temperature, depending on the position of the flame during heating
• Adaptable directly to any water filter fitted with a female ♀ Ø 10 or 14 mm joint

Instructions for use:

First of all we advise you to practice with a vaporizer empty of any substance.

1. Remove the small metal cap from The VonG
2. Fill the titanium bowl (tip) of The VonG(not the cap) with dry crumbled plants or resin
3. Close the cap of The VonG
4. Heat The VonG on the side of the cap, while turning, until you hear a click
   ⚠️ WARNING: DO NOT HEAT from the end, only from the sides of the cap!

5. After the click, stop heating and inhale
6. If you continue to heat after the 1^st click, a second click will be heard, indicating that you absolutely must stop heating, as otherwise combustion will take place, and this overheating tends to damage the cap
7. Before restarting the heater, wait for a 3^rd click (or 30 seconds if you didn't hear anything) to let it cool down. You can then repeat the operation and start heating until your bowl is completely vaporized
8. To fill and empty the bowl of The VonG, simply inhale and then blow out

⚠️ To avoid burns, remember to let your The VonG cool before placing your fingers on it.

Video and instructions for the VapCap M Dynavap :

For a real lighter:

A good storm / torch lighter will enable you to heat up your vaporizer Dynavap faster.

Find all our lighters / torches for portable vaporizers here

If you don't need a lighter at home, you can use the V2 induction heater Orion available here.