Tetra One

The Tetra Magnum is, as the name suggests, a rather large vaporizer for a wooden brick.

It is designed to be used on a desk or outdoors.

Available in several types of wood: Wenge, cherry and walnut.

Made with care by our Polish friends Dynabox, the Tetra Hydro requires a good small torch/storm lighter.

No need for a huge flame thanks to its size. It delivers however very big puffs once well taken in hand.

Joint size to connect to the mouthpiece or bong: 14 mm male.

Our bong adapters are available here and allow you to use the Tetra Magnum with any type of bong on 10, 14 and 18 mm joints.

Add a hose and bong adapter for a perfect connection and a very dense but ultra-fresh vapor thanks to the double action of the hose length (made of medical silicone) and the water filtration.

To buy a Tetra Magnum portable vaporizer is to receive:

• A complete Tetra Magnum
• a 50 mm hot air inlet glass tube.
• A 14mm female Aero mouthpiece - for efficient cooling of the vapor.
• Two 50 mm grids
• Two 70 mm grids
• Three O'rings.
• Two corks
• One stirrer / dabber

Technical characteristics of the Tetra Magnum Vaporizer:

• Heats on demand
• No precise control of the temperature but empirical.
• requires a storm lighter or torch.
• heats by convection for a very good vapor rendering.
• Glass mouthpiece.
• Glass air inlet.
• Wooden bowl
• Walnut wood.
• Dimensions: 11 x 4.5 x 3.5 cm / 5.5 x 4.5 x 3.5 cm

How to use the Tetra Magnum vaporizer:

• Open the Tetra Magnum and insert your plants well crumbled then close the Tetra Magnum.
• Place the Tetra Magnum in the socket of your bong, and start inhaling when you bring the flame in front of the air inlet.
• The more slowly you inhale, the bigger the puff will be because the air will be heated up well. And vice versa.
• The closer you bring the flame the stronger you will heat. And vice versa.
• Play with these two factors to find the right inhalation for you.
• Finish inhaling after removing the flame to cool the vaporization chamber of the Tetra Hydro.