Tester

The vaporizer the tester was designed by Katalyzer With the best possible flavor rendering and a use requiring heating means accessible everywhere.

Find here the online tester manual

Katalyzer Here offers you a very effective vaporizer for the tasting of your favorite plant (flower, resin or concentrate).

No electricity with the tester, a simple flash or storm flame lighter is enough.

The size of its bowl makes it possible to fill about 0.1 grams of plants or resin.
The tester being all glass, this vaporizer allows one of the best rendered market flavor because the glass is totally neutral in terms of the emission of flavor or toxin.

The tester wants a malignant vaporizer, you can see your plants vaporize live.
Your inhalation tube will then be gradually tuned with a fine golden film.
This can be tasted later by serving the inhalation tube as a straw dive into a cup of hot milk (or other fatty body).

Think of cleaning up for a very good flavor rendering.
For cleaning or even tips down.

Buy tester Katalyzer And receive:

• 1 x Inhalation tube The tester
• 1 x Heating head The tester
• 1 x six grids pack (to use optional).
• 1 x Keck plastic clip to hold the tube and heating head (not mandatory but practical if the desire takes you to put your head upside down)

If you wish you can equip yourself Additional grids for the tester here.
These are placed at the bottom of the bowl against glass stop pins.

Regular and precautionary maintenance allows a grid to last several months.

The tester needs a good torch lighter to work easily, the lower the flame will be less long you will need to heat the glass.
You can use a flame lighter, two flames or three flames by Ex depending on your choice of heating type.

Our different Torch and storm lighters are available here.

The tester is handmade by craftsmen for Katalyzer, first brand of French portable vaporizer. Being craftsmanally made of small differences may appear between each copy.

Tester's technical characteristics Katalyzer :

• Total length: 17 cm
• Diameter: 11 cm
• Borosilicate glass
• Joint 10 mm

Tester's instructions Katalyzer :

• Write your plants or resins.
• Fill in the inhalation tube raised bowl up to 1 to 1.5 cm maximum.
• Do not take up.
• Close with the heating head.
• No grid is required to use the tester to get the best flavor rendering.

In this case it is possible that fine particles of plants arrive until the mouth.
To avoid this, consider making a first suckling and sucking gently afterwards, you should no longer have any particles during the following inhalations.

Several types of heating are possible according to your expectations:

For the best flavor rendering Please prefer the soft heater.

Always keep in mind that with a vaporizer plus you aspire gently the air is hot and therefore the important inhalation. The more you aspire strong, the cold air that returns to the vaporizer has the occasion to heat. The puff will be smaller and softer.

Fast heating:

• Wear the tester to the mouth and start inhaling while heating your head.
• With your flame, making short and returns along the heating head make sure the flame goes well behind the hole.
• The more you hold the flame just behind and close to the hole longer the air will be hot and rapid vaporization.
  Steam will start training quickly when inhaled.
• Stop heating when you want it and shoot a few puffs if envy and as long as the glass is hot enough.
• Repeat the heater operation as needed.
  Be careful, as soon as you see your plants become dark brown you are at the maximum temperature, you have to stop heating.
• If you vaporize by putting the flame in front of the hole directly, the heating will be really fast with the risk of sub-combustion.

Intermediate heating:

• With a preferably or simple torch double flame lighter.
• Heat the heating head for 20 sec while making short and returns short and rotate the tester between your fingers.
• Wear the tester with the mouth and start inhaling.
  Then if necessary inhaler while making short and returns along the heating head and make sure the flame goes well in front of the hole.
  The more you hold the flame behind and close to the hole more the air will be hot and rapid vaporization.
• Steam will start training.
• Stop heating when you want it and shoot a few puffs if envy and as long as the glass is hot enough.
• Repeat the heater operation as needed.
• Be careful, as soon as you see your plants become dark brown you are at the maximum temperature, you have to stop heating.

Soft and powerful heater - the most effective for very homogeneous and strong extraction.

• With a triple flame lighter or torch obligatorily.
• Heat the heating head for 20 sec while making short and returns short and rotate the tester between your fingers.
• Then heat for 2 to 3 sec the part of the glass that lies around your plants while continuing to turn the tester between your fingers.
• Wear the tester with the mouth and start inhaling the most gently as possible for a big puff, or strong to be lower in temperature.
• You can repeat this operation as much as you want.
• Be careful, as soon as you see your plants become dark brown you are at the maximum temperature, you have to stop heating.

Small advanced technique:

1. For even more homogeneous and strong heating, after heating the heating head, you can heat the glass at the plants for a few seconds (2 to 3).
2. You can heat during inhalation but do well consciously that it will increase the heating rate by conduction if it is against the wall of the bowl, and will increase the heating by convection if it is via the heater hole
3. Take your time to tame the tester well. Your goal: to avoid black color in your plants.

Tester cleaning :

Two ways to clean it.

Serious cleaning:

• Fill it with a few centilitres of ISO 99.9% alcohol available here or cleanser Limpuro.
• Make a few minutes or much more depending on the dirt of your glass.
• Empty the alcohol in a suitable container to re-use it.
• Rinse your tester Katalyzer with clear water.
• If he does not shine enough, then a solution like the Limpuro will be perfect.
• Rinse again

And here, your tester Katalyzer is all clean!

⚠️ Glass is not covered by warranty, so we advise you to shake your package before signing for its reception and to sign with reservation if in doubt. In case of broken glass upon receipt, you have one hour to report it to us, otherwise no request can be accepted.

☎️ For any questions before or after purchase, our team of enthusiasts is at your disposal on our vape hotline at +33 1 83 64 69 26 from 11 am to 7:30 pm from Monday to Friday, and from 12:30 pm to 7:30 pm on Saturday. You can also place an order directly over the phone if you wish.

If you want to buy a vaporizer in Paris, our vaporizer shop is 500 meters from the République metro station, at 16 boulevard de Magenta, 75010 Paris.