DaVinci MIQRO

The vaporizer portable MIQRO DaVinci is a very small vapo with adjustable temperature to the degree.

Works with a removable battery 18350.
Adjustable temperature, passage of steam 100% zirconium ceramic.

33% smaller than the vaporizer DaVinci IQ.

⚠️ No longer has the iPhone app as of November 15, 2019, removed from the app store by Apple.

Contents with your vaporizer DaVinci MIQRO:

• 1 x vaporizer MIQRO DaVinci;
• 1 x 18350 battery;
• 1 x stirring tool;
• 1 x USB charging cable;
• 3 x alcohol wipes ;
• 4 x cures pipes ;

Technical Specifications:

• Ceramic chamber;
• Conduction heating;
• Four pre-set temperature profiles;
• Temperature adjustable to the nearest degree;
• Boost mode available to increase the temperature at the touch of a button;
• 100% zirconium ceramic steam passage for great flavor;
• Airy draw and consistent slats ;
• Bowl capacity: 0.2 grams approx;
• Removable battery;
• USB cable charging, usablewhile charging;
• 3 operating modes for an ultra personalized experience;
• Boost button to reach the maximum temperature with a single press;
• Charging time between 1h30 and 2 h ;
• Adjustable bowl size to fit your amount of material;
• Dimensions: 3,4 x 7,6 x 2,3 cm ;
• Weight: 100 grams;
• Heating time: 40 seconds.

Our opinion on the Miqro DaVinci:

The Miqro is a very good little vaporizer portable high-end.

Its zirconium ceramic vapor passage and its heating capacity allow a very good flavor rendering and consequent inhalations.
To discover as soon as possible for any fan of high vapo-technology.

Its use is very very simple with just 3 buttons.

Attention, the Miqro can become very hot in hand which is normal given the size of the device.

If you need autonomy, we advise you to turn to the vaporizer portable DaVinci IQ which has a battery twice as powerful.

How to use the vaporizer MIQRO DaVinci:

• Open the vaporization chamber of the MIQRO and place your plants well crumbled and slightly packed.
• 5 successive presses turn on the MIQRO and start the heating.
• A short press on the ON/OFF button allows you to switch to the temperature heating mode to the nearest degree or to the Smart Path mode with your 4 pre-set profiles.
• Pressing the plus or minus buttons on the side of the vaporizer allows you to change the temperature or change the Smart Path / heating profile.
• The temperature is indicated on the front of the MIQRO
• A long press on the ON/OFF button activates the boost mode as long as you keep it pressed.
• As soon as you release the button the MIQRO switches to Stand by mode and will turn off after two minutes, EXCEPT, if you press one of the + or - buttons which allows you to go back to the mode selected before the Boost was pressed.
• To decrease the intensity of the LEDs, press ON/OFF and - at the same time.
• To increase the intensity of the LEDs, quickly press ON/OFF and + at the same time
• To switch from Farhenheit to Celcius, press all three buttons at the same time.
• To know the status of your battery, press + and - at the same time.
• When you have 10% of battery left your Miqro will vibrate.
• To adjust the bowl size turn the bead clockwise.

Smart Path temperatures:

• Smart Path 1: starts at 176 °C and gradually rises to 188 °C.
• Smart Path 2: starts at 188 °C and gradually rises to 199 °C.
• Smart Path 3: starts at 199 °C and gradually rises to 210 °C
• Smart Path 4: starts at 210 °C and gradually rises to 221 °C

Here is a video presentation of the vaporizer Miqro Da Vinci: