Qaroma XL Aromatherapy Device DIY Kit

Features:

• Materials: quartz, borosilicate glass, ruby, stainless steel, walnut stabwood
• Convection heating
• 100% quartz and glass vapor passage
• Capacity for approx. 500 Ø 3 mm ruby pearls in the gemstone chamber
• Surface area and thermal mass approx. three times greater than a standard-size Qaroma

Kit contents:

• 1 x XL quartz housing
• 1 x XL dimpled glass adapter bowl Ø 18mm
• 1 x Ø 30mm coil
• 1 x PID controller with European power cable
• 1 x coil handle in walnut stabwood
• 1 x jade suet porcelain stand
• 660 x ruby pearls Ø 3mm
• 10 x steel screens Ø 17mm
• 1 x stainless steel dosing and stirring spoon

Instructions for use:

• Start at 265 ℃ (510 ℉) maximum, then slowly increase or decrease until you reach the temperature that suits you.
• For optimum efficiency, the coil should be stretched to be longer than the gemstone chamber, before being retracted again using the cap to hold it in place.
• Do not use coils incompatible with Qaroma XL. For reference, our coil pinout diagram is as follows:
  Coil (5-pin XLR male connector) Pin 1 = TC-, Pin 2 = TC+, Pin 3 = GND, Pin 4 = AC-, Pin 5 = AC+

Notes:

• If you leave the heater on for a long time, the Qaroma XL stand may become slightly hot. However, it is not dangerous to touch it briefly.
• Please note! We recommend placing your Qaroma XL sideways on the porcelain stand, especially if the seal on your Qaroma XL is quite tight on your bowl. Expansion during heating could cause cracks.