Taroma 3.0 Aromatherapy Device DIY Kit

Features:

• Materials: grade 2 titanium, stainless steel, borosilicate glass, stabwood (walnut), jade porcelain
• Convection heating
• Temperature accurate to the degree
• Uses at least 300 ruby pearls, Ø 3 mm

Kit contents:

• 1 x titanium housing
• 1 x Ø 14 mm short dimpled glass adapter
• 1 x Ø 20 mm coil 
• 1 x PID controller with European plug
• 1 x stabilized walnut coil handle
• 1 x jade porcelain stand
• 10 x Ø 17 mm stainless steel screens 
• 330 x Ø 3 mm ruby pearls 
• 1 x stainless steel scoop / stirring accessory

Cooling:

If you don't have a water filter, here's a list of bubblers we recommend you pair with the Taroma 3.0:

• Phil Trator: super-stable, robust and economical
• Osprey Bubbler - Cannabis Hardware: very sturdy and optimally cooled
• Ella Erbien: good cooling, good flavor rendering and economical
• Honeycomb: very good cooling and economical
• Philomene: good cooling and flavor, economical
• Alan Beaker: beaker-type, good overall performance and economical

User guide:

• Start at 279 ℃ (535 ℉) maximum, then slowly increase or decrease until you reach the temperature that suits you.
• For optimum efficiency, the coil (heating coil) should be stretched to be longer than the gemstone chamber, before being retracted again using the cap to hold it securely in place.

Notes:

• If you leave the heater on for a long time, the Taroma 3.0 support may become slightly hot. However, it is not dangerous to touch it briefly.
• Do not use your Taroma with an empty gemstone chamber, nor overfill it.
• Do not use coils incompatible with the Taroma 3.0. For reference, our coil pinout diagram is as follows:
  Coil (5-pin XLR male connector) Pin 1 = TC-, Pin 2 = TC+, Pin 3 = GND, Pin 4 = AC-, Pin 5 = AC+