Baroma 2.0 Arometherapy Device DIY Kit

Features:

• Materials: brass, borosilicate glass, walnut-stabilized wood, ruby, stainless steel
• Convection heating

Kit contents :

• 1 x pure brass housing
• 1 x short Ø 14 mm honeycomb adapter
• 1 x brass bowl Ø 14 mm
• 1 x coil Ø 20 mm
• 1 x PID controller with European plug
• 1 x stabilized walnut coil handle
• 1 x jade porcelain stand
• 165 x ruby pearls
• 10 x stainless steel grids Ø 17 mm
• 1 x stainless steel spoon / stirring accessory

If you wish to fill the gemstone chamber to the brim, another bag of ruby pearls QaromaShop(or Cannabis Hardware) may be required.

Cooling :

If you don't have a water filter, here's a list of bubblers we recommend you use with the Baroma 2.0:

• Phil Trator: super-stable, robust and economical
• Osprey Bubbler - Cannabis Hardware: very sturdy and optimally cooled
• Ella Erbien: good cooling, good flavor rendering and economical
• Honeycomb: very good cooling and economical
• Philomene: good cooling and flavor, economical
• Alan Beaker: beaker-type, good overall performance and economical

User guide:

• Start at 265 ℃ (510 ℉) maximum, then slowly increase or decrease until you reach the temperature that suits you.
• For optimum efficiency, the coil should be stretched to be longer than the gemstone chamber, before being retracted again using the cap to hold it firmly in place.
• Do not use coils incompatible with the Baroma 2.0. For reference, our coil pinout diagram is as follows:
  Coil (5-pin XLR male connector) Pin 1 = TC-, Pin 2 = TC+, Pin 3 = GND, Pin 4 = AC-, Pin 5 = AC+

Note: If you leave the heater on for a long time, the Baroma 2.0 stand may become slightly hot. However, it is not dangerous to touch it briefly.