Bubbler Ti Vaporizer Herborizer

Product information sheet

The TI Herborizer system 18mm is a desktop vaporizer that connects to your water filter whose glass joint for the slider is 18mm female.

Entirely made of titanium, the TI Herborizer system has been designed to guarantee complete extraction of your active ingredients in 1 to 2 puffs.

This vaporizer is therefore a priority for people who are looking for large inhalations. Amateurs of large puffs: here is your happiness:

To Buy a Vaporizer System TI Herborizer is to receive:

An 18.8 mm or 14.4 mm. slider/ Bowl TI

A Bubbler Herborizer

A Herborizer TI heating system

5 screens, the Ti injector

4 Viton joints

The titanium tip (dabber)

The temperature Controller

A storage case

AC adapter

A power cords

+

A mix of 10g of plants (Damiana or other according to availabilities)

Think of equipping yourself with a Keck Clip if necessary, this part allows, among other things, to hold two pieces of glass together, such as the stem and the slider, which is very useful when lifting the injector.

Technical characteristics of the TI Herborizer system:

Convection vaporizer with a swirling heat. Good rendered flavor

Temperature variable from 90° to 230° C, for the vaporization of dry medicinal plants and oils (in the bowl), it is optimized for the complete extraction in 1 or 2 inhalations.

All elements and the waterproof heating element are made of titanium (grade 2)

Compatible with all market glass bongs (RooR, PHx, Ehle, G-spot) equipped with an18.8mm or 14.4 mm laboratory joint.

Pay attention to combustion because it allows to vaporize plants, resins and concentrates.

We advise you not to exceed 6 or 6,5 on your temperature controller for the vaporization of plants and resins.

A 100% air and vapor flow made of glass for the best rendered flavor.

Temperature that are available on your Herborize TI:

For plants:

- 1 - - - 90°c
- 2 - - 110°c
- 3 - - 130°c
- 4 - - 160°c
- 5 - - 190°c
- 6 - - 220°c
- 7 - - 250°c
- 8 - - 280°c
- 9 - - 290°c
- 10 - -300°c

With the adapter for concentrates:

170°C to 500°C

Our opinion after test and review of the system vaporizer Bubbler Ti Herborizer:

The TI Herbrizer system is mostly for those who prefer large inhalations.

Its heating located above the plants recedes the process of percolation and allows a good preservation of the flavors.

However, we advise you not to leave the heater on top of the plants, because gradually the glass slider becomes warm enough to percolate a little the plants.

The 100% air flow as well as the vapor, ensures you to invest in one of the best vaporizer in terms of flavor rendering. It’s difficult to do better.

This desktop vaporizer is therefore made for large puffs and for a great rendered flavor.

It’s the direct French competitor of the Canadian Sublimator and the American Vapexhale Cloud.

Due its size and ergonomics it’s a very easy to use vaporizer that will offer you one of the best experiments of vapor possible

If you want a softer/ slower extraction, we recommend you the Herborizer XL vaporizer, which has a less powerful heating and offers the same characteristics about the aroma/ flavor rendering.

This desktop vaporizer is therefore made for large puffs and for a great rendered flavor.

It’s the direct French competitor of the Canadian Sublimator and the American Vapexhale Cloud.

Due to its size and ergonomics it’s a very easy to use vaporizer that will offer you one of the best experiments of vapor possible

Want to buy / purchase a vaporizer? Got a question before or after buying the Bubbler Ti vaporizer by Herborizer? Our vape enthusiast team is at your disposal at our service: +331.83.64.69.26 Monday to Friday from 10 a.m. to 6 p.m.

If you want to buy a vaporizer in Paris, our shop of vaporizer and e-cig, is 200 meters away from Voltaire's subway station on the line 9, at 74 rue Sedaine 75011 Paris.