Accueil > Concentrates > Vaporizers with concentrates > The Proxy - Puffco

The Proxy - Puffco

By buying this product you can collect up to 415 loyalty points. Your cart will total 415 loyalty points that can be converted into a voucher of 12,45 €.


daabIspireNL

249,17 € tax incl.

New product

Ispire presents a small revolution in the world of the dab, a device entirely dedicated to the concentrates, with water cooling and especially not of atomizer! Indeed, it offers a passage of steam entirely in glass and a borosilicate glass banger to sublimate the flavors of your most delicate extractions.

ℹ️ Collector's Edition limited to 4000 copies worldwide!

More details

Add to wishlist

Immediate shipment

Limited edition of 4000 copies in the exclusive Northern Lights color! The silicon protections provided are white instead of black, and the device offers a set of color gradients reminding the splendor of the northern lights. Useful, and definitely pleasant... You can also purchase the standard version of the daab™ if you prefer.

Daab Ispire Northern Lights Limited Collector Edition

The internal bowl is heated by induction allowing a stable, homogeneous and clean temperature rise, your extractions never being in contact with any heating element. Unparalleled flavors and easy cleanup in sight..

Characteristics :

  • Manufacturer: Ispire;
  • Materials: borosilicate glass, silicone..
  • Dimensions: 24.8 x 8.9 x 5.7 cm ;
  • Weight: 470 grams;
  • Works with concentrates of all viscosities and textures;
  • Multiple safeguards (heat, overvoltage, batteries) for better reliability and life span ;
  • Temperatures: 120 → 425 °C (250 → 800 °F);
  • Batteries: 2 x 18650 included (recommended: 3000 mAh 3500 mAh 30A with minimum 15A of CDR, amperage capacity or continuous discharge rate) ;
  • Charging: fast USB-C, usable while charging;
  • Activation modes: manual and automatic ;
  • Charging voltage: 5 V - 2 A ;
  • Refreshment: hydraulic, 18 mL recommended;
  • Residue recovery(reclaim) via a dedicated bowl (see diagram).

AnatomieDaabS.png

To purchase a daab™ is to receive:

  • 1 x daab™ device;
  • 1 x white padded carrying case;
  • 1 x water chamber and support bowl;
  • 1 x residue bowl (leftover unsprayed concentrates, or reclaim) ;
  • 1 x carb cap;
  • 2 x internal bowls ;
  • 2 x 18650 batteries;
  • 1 x USB-C cable;
  • 1 x user manual ;
  • 1 xhigh temp silicone O-ring ; 1 x dab pad
  • 1 x dabber (?) ;
  • 1 x dabber (stirring tool) ;
  • 3 x alcohol wipes ;
  • 2 x alcohol wipes;
  • 1 x silicone water chamber protector.

How the daab™ works:

  1. Assemble the device: insert the innercup into thecarrier cup ;
  2. Fill the water chamber through the mouthpiece of the water chamber, up to the demarcation line ;
  3. Turn on the device by pressing the power button five times. We recommend starting with a temperature of 225°C and then adjusting to your preferred temperature. The indicator light in the base will then flash red until the internal bowl temperature is stable. When the induction heating is in effect, the light will flash orange until the temperature is reached.
  4. Set the temperature: use the + and - buttons to adjust the heating. Start low, between 205 and 260 °C.
    Low 120 → 230 °C ;
    Medium 230 → 315 °C ;
    High 315 → 425 °C.
  5. Heat: Press the power button twice to start the automatic heating mode. Press again to stop.
  6. Wait: The orange light in the water chamber flashes during the heat up process. When the temperature is reached, the light stays on and the unit beeps three times. For a flavor that better respects the terpene profile of your extractions, you can make a "cold" dab by placing a little concentrate (about a grain of rice) in the borosilicate glass bowl before starting the heating.
  7. Enjoy: start inhaling when you want during the heating. Cover the support bowl with the carb cap for denser and more intense puffs. Inhale slowly so as not to suck your concentrates into the water chamber.
  8. Relaunch a warm-up you can start a new heating less than three minutes after the previous one. If you still have residual concentrate to spray, you can reheat the bowl by holding down the power button for 15 seconds. Re-heating the bowl while the inner bowl is still warm will overheat your extractions. You can use the supplied replacement bowl while the previous one cools on a heat-resistant surface before cleaning and using it again.

ℹ️ It is highly recommended to clean the induction area after each use.

The different error messages:

SensorError.pngSensor error.
OvercurrentProtection.pngCurrent above 16 A.
LowElectricity.pngBattery below 5%, the display flashes five times.
NoBattery.pngNo battery, charge or install a battery. The pictogram flashes for ten seconds.
NoLoad.pngPressing the activation button without a bowl/banger inserted in the induction zone will cause the LED indicator to flash red.
HighTemp.pngThe unit is too hot to operate. Please allow it to cool for five minutes.

⚠️ As the glass is not guaranteed, we invite you to shake your package before signing for it and to sign it with reservation in case of doubt. In case of broken glass upon receipt, you have one hour to report it to us, otherwise no claim can be accepted.

☎️ F or any question before or after purchase our team of enthusiasts is at your disposal on our steam hotline at 01 83 64 69 26 from 11 h to 19h30 from Monday to Friday, and from 12h30 to 19h30 on Saturday. You can also order directly over the phone if you wish.

If you want to buy a vaporizer in Paris, our store is 200 meters from the Voltaire metro station on line 9, at 74 rue Sedaine 75011 Paris.

27 other products in the same category: