By buying this product you can collect up to 95 loyalty points. Your cart will total 95 loyalty points that can be converted into a voucher of 2,85 €.
57,50 € tax incl.
Warning: Last items in stock!
The glass spikes allow the steam to pass through longer and thus cool the steam very effectively with a minimum of length.
Glass is one of the noblest materials and offers one of the best flavour rendering.
The real innovation of Dynavap, present on all the portable vaporizers of the brand
As soon as the vaporization temperature is reached (about 190°C) the cap of the vaporizer emits a small "click" indicating that you must stop the heating immediately. A second, louder click indicates that you really need to stop because the combustion is too close.
As soon as the vaporizer is cold enough for a second heating cycle, a 3ème click is heard.
Your Dynavap vaporizer is then ready to be heated again until you hear a click indicating that the vaporization temperature has been reached and that the VapCap no longer needs to be heated. And so on.
The Spikey VapCap is amazing, its size and simplicity of use are just great. A must have for any self-respecting vaporizer aficionado who needs a portable but qualitative vaporizer.
The welcome kit La Centrale Vapeur =
N.B.: A good storm lighter / torch will allow you to heat up your Dynavap vaporizer more quickly.
Do you want to buy a torch lighter of your choice?
If you want to filter your steam directly onto a suitable bubbler / bong :
Special offer with the purchase of your vaporizer, get a 9€ discount on the purchase of one of our bubblers or bangs marked "Bubble Vape"
To do this, simply enter the following code before paying BUBBLEVAPE
Buying a bubbler for your vaporizer allows you to humidify and cool your vapor which is very pleasant for temperatures above 200°C as well as for throats sensitive to dry, even cold vapor.
In the picture, the Dynavap sprayer is mounted on the bubbler with a fat mouthpiece available here.
Another solution to connect your Dynavap vaporizer to a bong with a 14mm joint, directly your mouthpiece surrounded by a moistened paper towel to make the complete joint.
First of all we advise you to train with a vaporizer empty of any substance
CAUTION: DO NOT HEAT FROM THE END!
But only on the sides of the cape (see video below)
Be careful though to avoid burning yourself, so remember to let your 2019 "M" cool before putting your fingers in it.
Cleaning this portable vaporizer is quite easy and quick, here is the procedure we recommend
Voila, your The "M" 2019 DynaVap vaporizer is brand new, odorless and ready to follow you wherever you want to take it.
The Spikey Vapcap works just as well as the Original VapCap, NonaVong or Omnivap, it is surprisingly easy to use.
The temperature control by the sound of a click is very ingenious and allows a complete and combustion-free vape experience.
Its components allow a very good rendering of the aromas and a complete and fast extraction of the active principles.
Robust, discreet, fully cleanable, it will quickly become your all-terrain vaporizer to take with you everywhere.
The Spikey Vapcap is, like its predecessors, a very good portable vaporizer, and with a big positive point, its 100% glass vapour passage which allows an unequalled flavour rendering.
A must have for any vape enthusiast and especially a very very good vaporizer.
If you compare only the flavor / vapor the VapCap is worth a vaporizer 3 times more expensive so if you are looking for a small cheap vapo to start or to tide you over the Spikey Vapcap is an excellent choice.
All Dynavap portable vaporizers have the same heating element that indicates the temperature with a "click": The Cap - stainless steel.
The finish on the body and especially an airflow (air passage) more airy on the 2018 "M", so a draw closer to the combustion on the 2017 "M".
The following changes will also be seen on the 2019 "M":
The body of the VapCap has been machined, so as to offer resistance when handling, in fact, even with your eyes closed, thanks to the ridges and finishes, you will be able to know which side you are holding the VapCap "M" 2019. The side of the tip will be the side with the ridges.
The AIR PORT (the air intake of the DyNaVaP) is now surrounded by additional trim, allowing more control. This allows for more control over the air supply.
Deep finishes are located just under the AIR PORT, allowing, a simplified location of the air inlet (just on the other side), an ergonomics and a grip even more pleasant, as well as the handling, we will now be able to vary this air inlet at will!
And finally, the tip. This one has been greatly improved. The air inlet of the tip in propeller mode has been replaced by an inlet that snakes through the tip, thus improving the air inlet and the filling of the chamber.
The difference is in the body of the VapCap vaporizer, as it is made of rare wood and interchangeable on the Ti Woody version.
The stainless steel parts of The "M" are in titanium in the Ti Woody (the bowl for example).
The difference is in the body of the Omnivap vaporizer which is 100% titanium, titanium being lighter, stronger and cooling faster than steel.
Furthermore, the Omnivap has an adjustable air flow/draft where other Dynavap vaporizers like the The 2018 "M" or the VapCap Original are equipped with a simple plugging hole.
The team of La Centrale Vapeur would like to inform you that on the Cape, marks are more or less visible. They are machining and welding marks. Sometimes the Cap shows traces of heating, it is simply the metal reacting to the heat during welding or cutting. These marks or discolorations are quite normal, and do not interfere with the operation of the Cap.
If you have any questions before or after purchasing the new Spikey Vapcap from
You can also order directly over the phone if you wish.
If you want to buy a vaporizer in Paris, our shop of vaporizer and e-cig, is now 200 meters from the metro Voltaire on line 9, at 74 rue Sedaine 75011 Paris.